A4/316 grade stainless steel wingscrew for fixing timber back to light section steel.
Estimated lead times
1 Day
Estimated lead times
1 Day
Estimated lead times
1 Day
Estimated lead times
1 Day
Estimated lead times
1 Day
Estimated lead times
1 Day
A4/316 grade stainless steel wing screws for fixing timber to light steel.
Features
- Wings behind drillpoint drills clearance hole through timber, eliminating thread engagement
- Wings break off on contact with metal substrate
- A4/316 grade stainless steel for corrosion resistance
- Purpose designed for easy and effective installation
- For mechanically fixing timber components to light metal purlins and rails
Years / Environment
|
|||||||
---|---|---|---|---|---|---|---|
Interior | Semi-interior | Rural | Urban | Industrial / Coastal | Marine | Swimming pools & Chemical plants | |
Corrosivity Category | C1 | - | C2 | C3 | C4 | C5 | - |
Austenitic Stainless Steel A4 Grade (316) | 40 | 40 | 40 | 40 | 30 | 25 | 0 |
Years / Environment
|
|||||||
---|---|---|---|---|---|---|---|
Interior | Semi-interior | Rural | Urban | Industrial / Coastal | Marine | Swimming pools & Chemical plants | |
Corrosivity Category | C1 | - | C2 | C3 | C4 | C5 | - |
Austenitic Stainless Steel A4 Grade (316) | 40 | 40 | 40 | 40 | 30 | 25 | 0 |
Years / Environment
|
|||||||
---|---|---|---|---|---|---|---|
Interior | Semi-interior | Rural | Urban | Industrial / Coastal | Marine | Swimming pools & Chemical plants | |
Corrosivity Category | C1 | - | C2 | C3 | C4 | C5 | - |
Austenitic Stainless Steel A4 Grade (316) | 40 | 40 | 40 | 40 | 30 | 25 | 0 |
Years / Environment
|
|||||||
---|---|---|---|---|---|---|---|
Interior | Semi-interior | Rural | Urban | Industrial / Coastal | Marine | Swimming pools & Chemical plants | |
Corrosivity Category | C1 | - | C2 | C3 | C4 | C5 | - |
Austenitic Stainless Steel A4 Grade (316) | 40 | 40 | 40 | 40 | 30 | 25 | 0 |
NR,II,K (Tensile - Pull-out) | 1.5mm Steel: 1.8 kN |
2mm Steel: 3.64 kN | |
3mm Steel: 6.24 kN |
NR,II,K (Tensile - Pull-out) | 1.5mm Steel: 1.8 kN |
2mm Steel: 3.64 kN | |
3mm Steel: 6.24 kN |
NR,II,K (Tensile - Pull-out) | 1.5mm Steel: 1.8 kN |
2mm Steel: 3.64 kN | |
3mm Steel: 6.24 kN |
NR,II,K (Tensile - Pull-out) | 1.5mm Steel: 1.8 kN |
2mm Steel: 3.64 kN | |
3mm Steel: 6.24 kN |
Installation tool | Variable speed electric screwdriver |
Installation drive | TX30 |
Installation speed | 1500 RPM |
Correct installation | Fasteners should be driven within three degrees of perpendicular to the surface of the fastened material. Use a depth-setting nosepiece to avoid over-driving, and do not over-tighten. Variants with bonded washers should not have the rubber compressed to less than two-thirds of its uncompressed height. Care should be taken when engaging and disengaging from the fastener head to avoid damage to the protective coating. |
Handling | Fasteners may have sharp edges, and the use of power tools can be dangerous. Use personal protective equipment. Store fasteners in dry conditions. Inspect each fastener before use and do not use damaged fasteners. |
A4/316 grade stainless steel wing screws for fixing timber to light steel.
Features
- Wings behind drillpoint drills clearance hole through timber, eliminating thread engagement
- Wings break off on contact with metal substrate
- A4/316 grade stainless steel for corrosion resistance
- Purpose designed for easy and effective installation
- For mechanically fixing timber components to light metal purlins and rails
Years / Environment
|
|||||||
---|---|---|---|---|---|---|---|
Interior | Semi-interior | Rural | Urban | Industrial / Coastal | Marine | Swimming pools & Chemical plants | |
Corrosivity Category | C1 | - | C2 | C3 | C4 | C5 | - |
Austenitic Stainless Steel A4 Grade (316) | 40 | 40 | 40 | 40 | 30 | 25 | 0 |
Years / Environment
|
|||||||
---|---|---|---|---|---|---|---|
Interior | Semi-interior | Rural | Urban | Industrial / Coastal | Marine | Swimming pools & Chemical plants | |
Corrosivity Category | C1 | - | C2 | C3 | C4 | C5 | - |
Austenitic Stainless Steel A4 Grade (316) | 40 | 40 | 40 | 40 | 30 | 25 | 0 |
Years / Environment
|
|||||||
---|---|---|---|---|---|---|---|
Interior | Semi-interior | Rural | Urban | Industrial / Coastal | Marine | Swimming pools & Chemical plants | |
Corrosivity Category | C1 | - | C2 | C3 | C4 | C5 | - |
Austenitic Stainless Steel A4 Grade (316) | 40 | 40 | 40 | 40 | 30 | 25 | 0 |
Years / Environment
|
|||||||
---|---|---|---|---|---|---|---|
Interior | Semi-interior | Rural | Urban | Industrial / Coastal | Marine | Swimming pools & Chemical plants | |
Corrosivity Category | C1 | - | C2 | C3 | C4 | C5 | - |
Austenitic Stainless Steel A4 Grade (316) | 40 | 40 | 40 | 40 | 30 | 25 | 0 |
NR,II,K (Tensile - Pull-out) | 1.5mm Steel: 1.8 kN |
2mm Steel: 3.64 kN | |
3mm Steel: 6.24 kN |
NR,II,K (Tensile - Pull-out) | 1.5mm Steel: 1.8 kN |
2mm Steel: 3.64 kN | |
3mm Steel: 6.24 kN |
NR,II,K (Tensile - Pull-out) | 1.5mm Steel: 1.8 kN |
2mm Steel: 3.64 kN | |
3mm Steel: 6.24 kN |
NR,II,K (Tensile - Pull-out) | 1.5mm Steel: 1.8 kN |
2mm Steel: 3.64 kN | |
3mm Steel: 6.24 kN |
Installation tool | Variable speed electric screwdriver |
Installation drive | TX30 |
Installation speed | 1500 RPM |
Correct installation | Fasteners should be driven within three degrees of perpendicular to the surface of the fastened material. Use a depth-setting nosepiece to avoid over-driving, and do not over-tighten. Variants with bonded washers should not have the rubber compressed to less than two-thirds of its uncompressed height. Care should be taken when engaging and disengaging from the fastener head to avoid damage to the protective coating. |
Handling | Fasteners may have sharp edges, and the use of power tools can be dangerous. Use personal protective equipment. Store fasteners in dry conditions. Inspect each fastener before use and do not use damaged fasteners. |