DrillFast® painted low profile light steel mainfix fastener, 29mm washer
A4/316 grade stainless steel lacquered fastener for fixing to light metal purlins and rails.
Supplied pre-assembled with 29mm bonded washer, normally used for rooflight applications.
Certified by
Estimated lead times
2-3 Days
Estimated lead times
2-3 Days
Estimated lead times
2-3 Days
Certified by
Estimated lead times
2-3 Days
Estimated lead times
2-3 Days
Estimated lead times
2-3 Days
Product Code
DF3-SSA4-PL-L29-5.5
Lead Time
2-3 Days
Lead Time
2-3 Days
Lead Time
2-3 Days
Your price
Qty
£0.65
(ex.VAT)
As low as:
(ex.VAT)
This item may be subject to a £30 powder coating surcharge. This will be confirmed at checkout
Create New Favourites List
Key Features
Specification
Capacity
Performance
Installation
Downloads
Description
Low profile stainless steel fasteners for use in single skin sheeting, facade and rainscreen, and flashing / trim detail applications.
Features & Benefits
- A4/316 stainless steel for corrosion resistance
- Low profile painted head to complement the best in modern construction techniques
- Specialist RedDrive installation tool for optimum install efficiency
- Supplied pre-assembled with a 29mm aluminium / EPDM bonded sealing washer
- Available in almost any RAL, BS, or NCS colour, please call us if the colour you require isn't on the drop down list
Application
- For mechanically fixing components of steel, aluminium and metal framing systems
- For mechanically fixing metal sheeting systems to light metal purlins and rails
Fastener Material
Fastener
Austenitic Stainless Steel A4 Grade (316) with organic coating
Sealing Washer
A29 Washer
Durability Class
|
Years / Environment
|
|||||||
|---|---|---|---|---|---|---|---|
| Interior | Semi-interior | Rural | Urban | Industrial / Coastal | Marine | Swimming pools & Chemical plants | |
| Corrosivity Category | C1 | - | C2 | C3 | C4 | C5 | - |
| Austenitic Stainless Steel A4 Grade (316) | 40 | 40 | 40 | 40 | 30 | 25 | 0 |
Dimensions
Diameter
5.5 mm
Head Style
Low profile pan, TX25 recess
Fastener Material
Fastener
Austenitic Stainless Steel A4 Grade (316) with organic coating
Sealing Washer
A29 Washer
Durability Class
|
Years / Environment
|
|||||||
|---|---|---|---|---|---|---|---|
| Interior | Semi-interior | Rural | Urban | Industrial / Coastal | Marine | Swimming pools & Chemical plants | |
| Corrosivity Category | C1 | - | C2 | C3 | C4 | C5 | - |
| Austenitic Stainless Steel A4 Grade (316) | 40 | 40 | 40 | 40 | 30 | 25 | 0 |
Dimensions
Diameter
5.5 mm
Length (mm)
50 mm
Effective Thread Length (Min)
0 mm
Effective Thread Length (Max)
29 mm
Head Style
Low profile pan, TX25 recess
Drilling Capacity
Steel
1.2 mm
3 mm
Fastener Material
Fastener
Austenitic Stainless Steel A4 Grade (316) with organic coating
Sealing Washer
A29 Washer
Durability Class
|
Years / Environment
|
|||||||
|---|---|---|---|---|---|---|---|
| Interior | Semi-interior | Rural | Urban | Industrial / Coastal | Marine | Swimming pools & Chemical plants | |
| Corrosivity Category | C1 | - | C2 | C3 | C4 | C5 | - |
| Austenitic Stainless Steel A4 Grade (316) | 40 | 40 | 40 | 40 | 30 | 25 | 0 |
Dimensions
Diameter
5.5 mm
Length (mm)
75 mm
Effective Thread Length (Min)
0 mm
Effective Thread Length (Max)
54 mm
Head Style
Low profile pan, TX25 recess
Drilling Capacity
Steel
1.2 mm
3 mm
Fastener Material
Fastener
Austenitic Stainless Steel A4 Grade (316) with organic coating
Sealing Washer
A29 Washer
Durability Class
|
Years / Environment
|
|||||||
|---|---|---|---|---|---|---|---|
| Interior | Semi-interior | Rural | Urban | Industrial / Coastal | Marine | Swimming pools & Chemical plants | |
| Corrosivity Category | C1 | - | C2 | C3 | C4 | C5 | - |
| Austenitic Stainless Steel A4 Grade (316) | 40 | 40 | 40 | 40 | 30 | 25 | 0 |
Dimensions
Diameter
5.5 mm
Length (mm)
35 mm
Effective Thread Length (Min)
0 mm
Effective Thread Length (Max)
7 mm
Head Style
Low profile pan, TX25 recess
Drilling Capacity
Steel
1.2 mm
3 mm
Build-up
Effective thread length
Fastener Shear Performance VR,K
|
Substrate
Steel
|
1.2 mm |
| Steel | |
| 0.5 mm | 1.97 kN |
Fastener pull-out performance
| NR,II,K (Tensile - Pull-out) | 1.2mm Steel: 1.43 kN |
| 2mm Steel: 2.62 kN | |
| 3mm Steel: 4.76 kN |
Fastener Pullover Performance NR,K
|
Substrate
Steel
|
A29 Washer |
| Steel | 3 mm |
| 0.5 mm | 3.81 kN |
| 0.7 mm | 3.94 kN |
Fastener Shear Performance VR,K
|
Substrate
Steel
|
1.2 mm |
| Steel | |
| 0.5 mm | 1.97 kN |
Fastener pull-out performance
| NR,II,K (Tensile - Pull-out) | 1.2mm Steel: 1.43 kN |
| 2mm Steel: 2.62 kN | |
| 3mm Steel: 4.76 kN |
Fastener Pullover Performance NR,K
|
Substrate
Steel
|
A29 Washer |
| Steel | 3 mm |
| 0.5 mm | 3.81 kN |
| 0.7 mm | 3.94 kN |
Fastener Shear Performance VR,K
|
Substrate
Steel
|
1.2 mm |
| Steel | |
| 0.5 mm | 1.97 kN |
Fastener pull-out performance
| NR,II,K (Tensile - Pull-out) | 1.2mm Steel: 1.43 kN |
| 2mm Steel: 2.62 kN | |
| 3mm Steel: 4.76 kN |
Fastener Pullover Performance NR,K
|
Substrate
Steel
|
A29 Washer |
| Steel | 3 mm |
| 0.5 mm | 3.81 kN |
| 0.7 mm | 3.94 kN |
Fastener Shear Performance VR,K
|
Substrate
Steel
|
1.2 mm |
| Steel | |
| 0.5 mm | 1.97 kN |
Fastener pull-out performance
| NR,II,K (Tensile - Pull-out) | 1.2mm Steel: 1.43 kN |
| 2mm Steel: 2.62 kN | |
| 3mm Steel: 4.76 kN |
Fastener Pullover Performance NR,K
|
Substrate
Steel
|
A29 Washer |
| Steel | 3 mm |
| 0.5 mm | 3.81 kN |
| 0.7 mm | 3.94 kN |
Installation and handling
| Installation tool | Variable speed electric screw gun |
| Installation drive | Fixfast RedDrive |
| Installation speed | 1500 RPM |
| Correct installation | Fasteners should be driven within three degrees of perpendicular to the surface of the fastened material. Use a depth-setting nosepiece to avoid over-driving, and do not over-tighten. Variants with bonded washers should not have the rubber compressed to less than two-thirds of its uncompressed height. Care should be taken when engaging and disengaging from the fastener head to avoid damage to the protective coating. |
| Handling | Fasteners may have sharp edges, and the use of power tools can be dangerous. Use personal protective equipment. Store fasteners in dry conditions. Inspect each fastener before use and do not use damaged fasteners. |
Downloads
Please see the below files available to download for this product
Key Features
Description
Low profile stainless steel fasteners for use in single skin sheeting, facade and rainscreen, and flashing / trim detail applications.
Features & Benefits
- A4/316 stainless steel for corrosion resistance
- Low profile painted head to complement the best in modern construction techniques
- Specialist RedDrive installation tool for optimum install efficiency
- Supplied pre-assembled with a 29mm aluminium / EPDM bonded sealing washer
- Available in almost any RAL, BS, or NCS colour, please call us if the colour you require isn't on the drop down list
Application
- For mechanically fixing components of steel, aluminium and metal framing systems
- For mechanically fixing metal sheeting systems to light metal purlins and rails
Specification
Fastener Material
Fastener
Austenitic Stainless Steel A4 Grade (316) with organic coating
Sealing Washer
A29 Washer
Durability Class
|
Years / Environment
|
|||||||
|---|---|---|---|---|---|---|---|
| Interior | Semi-interior | Rural | Urban | Industrial / Coastal | Marine | Swimming pools & Chemical plants | |
| Corrosivity Category | C1 | - | C2 | C3 | C4 | C5 | - |
| Austenitic Stainless Steel A4 Grade (316) | 40 | 40 | 40 | 40 | 30 | 25 | 0 |
Dimensions
Diameter
5.5 mm
Head Style
Low profile pan, TX25 recess
Fastener Material
Fastener
Austenitic Stainless Steel A4 Grade (316) with organic coating
Sealing Washer
A29 Washer
Durability Class
|
Years / Environment
|
|||||||
|---|---|---|---|---|---|---|---|
| Interior | Semi-interior | Rural | Urban | Industrial / Coastal | Marine | Swimming pools & Chemical plants | |
| Corrosivity Category | C1 | - | C2 | C3 | C4 | C5 | - |
| Austenitic Stainless Steel A4 Grade (316) | 40 | 40 | 40 | 40 | 30 | 25 | 0 |
Dimensions
Diameter
5.5 mm
Length (mm)
50 mm
Effective Thread Length (Min)
0 mm
Effective Thread Length (Max)
29 mm
Head Style
Low profile pan, TX25 recess
Drilling Capacity
Steel
1.2 mm
3 mm
Fastener Material
Fastener
Austenitic Stainless Steel A4 Grade (316) with organic coating
Sealing Washer
A29 Washer
Durability Class
|
Years / Environment
|
|||||||
|---|---|---|---|---|---|---|---|
| Interior | Semi-interior | Rural | Urban | Industrial / Coastal | Marine | Swimming pools & Chemical plants | |
| Corrosivity Category | C1 | - | C2 | C3 | C4 | C5 | - |
| Austenitic Stainless Steel A4 Grade (316) | 40 | 40 | 40 | 40 | 30 | 25 | 0 |
Dimensions
Diameter
5.5 mm
Length (mm)
75 mm
Effective Thread Length (Min)
0 mm
Effective Thread Length (Max)
54 mm
Head Style
Low profile pan, TX25 recess
Drilling Capacity
Steel
1.2 mm
3 mm
Fastener Material
Fastener
Austenitic Stainless Steel A4 Grade (316) with organic coating
Sealing Washer
A29 Washer
Durability Class
|
Years / Environment
|
|||||||
|---|---|---|---|---|---|---|---|
| Interior | Semi-interior | Rural | Urban | Industrial / Coastal | Marine | Swimming pools & Chemical plants | |
| Corrosivity Category | C1 | - | C2 | C3 | C4 | C5 | - |
| Austenitic Stainless Steel A4 Grade (316) | 40 | 40 | 40 | 40 | 30 | 25 | 0 |
Dimensions
Diameter
5.5 mm
Length (mm)
35 mm
Effective Thread Length (Min)
0 mm
Effective Thread Length (Max)
7 mm
Head Style
Low profile pan, TX25 recess
Drilling Capacity
Steel
1.2 mm
3 mm
Capacity
Build-up
Effective thread length
Performance
Fastener Shear Performance VR,K
|
Substrate
Steel
|
1.2 mm |
| Steel | |
| 0.5 mm | 1.97 kN |
Fastener pull-out performance
| NR,II,K (Tensile - Pull-out) | 1.2mm Steel: 1.43 kN |
| 2mm Steel: 2.62 kN | |
| 3mm Steel: 4.76 kN |
Fastener Pullover Performance NR,K
|
Substrate
Steel
|
A29 Washer |
| Steel | 3 mm |
| 0.5 mm | 3.81 kN |
| 0.7 mm | 3.94 kN |
Fastener Shear Performance VR,K
|
Substrate
Steel
|
1.2 mm |
| Steel | |
| 0.5 mm | 1.97 kN |
Fastener pull-out performance
| NR,II,K (Tensile - Pull-out) | 1.2mm Steel: 1.43 kN |
| 2mm Steel: 2.62 kN | |
| 3mm Steel: 4.76 kN |
Fastener Pullover Performance NR,K
|
Substrate
Steel
|
A29 Washer |
| Steel | 3 mm |
| 0.5 mm | 3.81 kN |
| 0.7 mm | 3.94 kN |
Fastener Shear Performance VR,K
|
Substrate
Steel
|
1.2 mm |
| Steel | |
| 0.5 mm | 1.97 kN |
Fastener pull-out performance
| NR,II,K (Tensile - Pull-out) | 1.2mm Steel: 1.43 kN |
| 2mm Steel: 2.62 kN | |
| 3mm Steel: 4.76 kN |
Fastener Pullover Performance NR,K
|
Substrate
Steel
|
A29 Washer |
| Steel | 3 mm |