A2/304 grade stainless steel halter fasteners for fixing to timber or light section steel up to 2mm, with A19 washer
Estimated lead times
1 Day
Estimated lead times
1 Day
Estimated lead times
1 Day
Estimated lead times
1 Day
Stainless steel fasteners for fastening clips and halters to steel and timber purlins and rails.
Features
- A2/304 grade stainless steel
- DF2-Reduced drillpoint for fastening to thin steel and timber
- Supplied with A19 sealing washer
- For mechanically fixing clips and halters to steel and timber purlins and rails
- DF2 - reduced drillpoint for fastening into thin steel and timber
Years / Environment
|
|||||||
---|---|---|---|---|---|---|---|
Interior | Semi-interior | Rural | Urban | Industrial / Coastal | Marine | Swimming pools & Chemical plants | |
Corrosivity Category | C1 | - | C2 | C3 | C4 | C5 | - |
Austenitic Stainless Steel A2 Grade (304) | 30 | 25 | 25 | 25 | 15 | 0 | 0 |
Years / Environment
|
|||||||
---|---|---|---|---|---|---|---|
Interior | Semi-interior | Rural | Urban | Industrial / Coastal | Marine | Swimming pools & Chemical plants | |
Corrosivity Category | C1 | - | C2 | C3 | C4 | C5 | - |
Austenitic Stainless Steel A2 Grade (304) | 30 | 25 | 25 | 25 | 15 | 0 | 0 |
Years / Environment
|
|||||||
---|---|---|---|---|---|---|---|
Interior | Semi-interior | Rural | Urban | Industrial / Coastal | Marine | Swimming pools & Chemical plants | |
Corrosivity Category | C1 | - | C2 | C3 | C4 | C5 | - |
Austenitic Stainless Steel A2 Grade (304) | 30 | 25 | 25 | 25 | 15 | 0 | 0 |
Substrate
Steel
|
1.2 mm |
Steel | |
0.5 mm | 2.03 kN |
NR,II,K (Tensile - Pull-out) | 0.5mm Steel: 0.69 kN |
1.2mm Steel: 2.67 kN | |
2mm Steel: 4.83 kN |
Substrate
Steel
|
A19 Washer |
Steel | 1.2 mm |
0.5 mm | 3.06 kN |
0.7 mm | 3.54 kN |
Substrate
Steel
|
1.2 mm |
Steel | |
0.5 mm | 2.03 kN |
NR,II,K (Tensile - Pull-out) | 0.5mm Steel: 0.69 kN |
1.2mm Steel: 2.67 kN | |
2mm Steel: 4.83 kN |
Substrate
Steel
|
A19 Washer |
Steel | 1.2 mm |
0.5 mm | 3.06 kN |
0.7 mm | 3.54 kN |
Substrate
Steel
|
1.2 mm |
Steel | |
0.5 mm | 2.03 kN |
NR,II,K (Tensile - Pull-out) | 0.5mm Steel: 0.69 kN |
1.2mm Steel: 2.67 kN | |
2mm Steel: 4.83 kN |
Substrate
Steel
|
A19 Washer |
Steel | 1.2 mm |
0.5 mm | 3.06 kN |
0.7 mm | 3.54 kN |
Installation tool | Variable speed electric screwdriver |
Installation drive | Fixfast GreenDrive (8mm hex integral socket with retaining clip) |
Installation speed | 1500 RPM |
Correct installation | Fasteners should be driven within three degrees of perpendicular to the surface of the fastened material. Use a depth-setting nosepiece to avoid over-driving, and do not over-tighten. Variants with bonded washers should not have the rubber compressed to less than two-thirds of its uncompressed height. Care should be taken when engaging and disengaging from the fastener head to avoid damage to the protective coating. |
Handling | Fasteners may have sharp edges, and the use of power tools can be dangerous. Use personal protective equipment. Store fasteners in dry conditions. Inspect each fastener before use and do not use damaged fasteners. |
Stainless steel fasteners for fastening clips and halters to steel and timber purlins and rails.
Features
- A2/304 grade stainless steel
- DF2-Reduced drillpoint for fastening to thin steel and timber
- Supplied with A19 sealing washer
- For mechanically fixing clips and halters to steel and timber purlins and rails
- DF2 - reduced drillpoint for fastening into thin steel and timber
Years / Environment
|
|||||||
---|---|---|---|---|---|---|---|
Interior | Semi-interior | Rural | Urban | Industrial / Coastal | Marine | Swimming pools & Chemical plants | |
Corrosivity Category | C1 | - | C2 | C3 | C4 | C5 | - |
Austenitic Stainless Steel A2 Grade (304) | 30 | 25 | 25 | 25 | 15 | 0 | 0 |
Years / Environment
|
|||||||
---|---|---|---|---|---|---|---|
Interior | Semi-interior | Rural | Urban | Industrial / Coastal | Marine | Swimming pools & Chemical plants | |
Corrosivity Category | C1 | - | C2 | C3 | C4 | C5 | - |
Austenitic Stainless Steel A2 Grade (304) | 30 | 25 | 25 | 25 | 15 | 0 | 0 |
Years / Environment
|
|||||||
---|---|---|---|---|---|---|---|
Interior | Semi-interior | Rural | Urban | Industrial / Coastal | Marine | Swimming pools & Chemical plants | |
Corrosivity Category | C1 | - | C2 | C3 | C4 | C5 | - |
Austenitic Stainless Steel A2 Grade (304) | 30 | 25 | 25 | 25 | 15 | 0 | 0 |
Substrate
Steel
|
1.2 mm |
Steel | |
0.5 mm | 2.03 kN |
NR,II,K (Tensile - Pull-out) | 0.5mm Steel: 0.69 kN |
1.2mm Steel: 2.67 kN | |
2mm Steel: 4.83 kN |
Substrate
Steel
|
A19 Washer |
Steel | 1.2 mm |
0.5 mm | 3.06 kN |
0.7 mm | 3.54 kN |
Substrate
Steel
|
1.2 mm |
Steel | |
0.5 mm | 2.03 kN |
NR,II,K (Tensile - Pull-out) | 0.5mm Steel: 0.69 kN |
1.2mm Steel: 2.67 kN | |
2mm Steel: 4.83 kN |
Substrate
Steel
|
A19 Washer |
Steel | 1.2 mm |
0.5 mm | 3.06 kN |
0.7 mm | 3.54 kN |
Substrate
Steel
|
1.2 mm |
Steel | |
0.5 mm | 2.03 kN |
NR,II,K (Tensile - Pull-out) | 0.5mm Steel: 0.69 kN |
1.2mm Steel: 2.67 kN | |
2mm Steel: 4.83 kN |
Substrate
Steel
|
A19 Washer |
Steel | 1.2 mm |
0.5 mm | 3.06 kN |
0.7 mm | 3.54 kN |
Installation tool | Variable speed electric screwdriver |
Installation drive | Fixfast GreenDrive (8mm hex integral socket with retaining clip) |
Installation speed | 1500 RPM |
Correct installation | Fasteners should be driven within three degrees of perpendicular to the surface of the fastened material. Use a depth-setting nosepiece to avoid over-driving, and do not over-tighten. Variants with bonded washers should not have the rubber compressed to less than two-thirds of its uncompressed height. Care should be taken when engaging and disengaging from the fastener head to avoid damage to the protective coating. |
Handling | Fasteners may have sharp edges, and the use of power tools can be dangerous. Use personal protective equipment. Store fasteners in dry conditions. Inspect each fastener before use and do not use damaged fasteners. |