DrillFast® carbon steel panel fasteners for timber, 15mm washer

Carbon steel composite panel fastener for fixing to timber

Supplied pre-assembled with an Aluminium / EPDM rubber 15mm diameter sealing washer, normally used in wall applications.

Certified by

Certified by

DrillFast® carbon steel panel fasteners for timber, 15mm washer

Carbon steel composite panel fastener for fixing to timber

Supplied pre-assembled with an Aluminium / EPDM rubber 15mm diameter sealing washer, normally used in wall applications.

Product Code

Lengths*

Size guide

Your price

Per 100

Qty

Create New Favourites List

Related Products

Add to favourites

Create New Favourites List

Product code

Your price

Per 100

	Years / Environment
	Interior	Semi-interior	Rural	Urban	Industrial / Coastal	Marine	Swimming pools & Chemical plants
Corrosivity Category	C1	-	C2	C3	C4	C5	-
Carbon steel case hardened	25	20	12	0	0	0	0

	Years / Environment
	Interior	Semi-interior	Rural	Urban	Industrial / Coastal	Marine	Swimming pools & Chemical plants
Corrosivity Category	C1	-	C2	C3	C4	C5	-
Carbon steel case hardened	25	20	12	0	0	0	0

	Years / Environment
	Interior	Semi-interior	Rural	Urban	Industrial / Coastal	Marine	Swimming pools & Chemical plants
Corrosivity Category	C1	-	C2	C3	C4	C5	-
Carbon steel case hardened	25	20	12	0	0	0	0

	Years / Environment
	Interior	Semi-interior	Rural	Urban	Industrial / Coastal	Marine	Swimming pools & Chemical plants
Corrosivity Category	C1	-	C2	C3	C4	C5	-
Carbon steel case hardened	25	20	12	0	0	0	0

	Years / Environment
	Interior	Semi-interior	Rural	Urban	Industrial / Coastal	Marine	Swimming pools & Chemical plants
Corrosivity Category	C1	-	C2	C3	C4	C5	-
Carbon steel case hardened	25	20	12	0	0	0	0

Fastener SKU	Washer	Min	Max
DFT-HT-A15-5.5 x 80	A15 Washer	28 mm	43 mm
DFT-HT-A15-5.5 x 100	A15 Washer	48 mm	63 mm
DFT-HT-A15-5.5 x 130	A15 Washer	78 mm	93 mm
DFT-HT-A15-5.5 x 180	A15 Washer	118 mm	143 mm

NR,II,K (Tensile - Pull-out)	Timber 35mm embedment: 2.46 kN
	Timber 45mm embedment: 3.13 kN

Installation tool	Variable speed electric screw gun
Installation drive	Fixfast YellowDrive socket
Installation speed	1500 RPM
Correct installation	Fasteners should be driven within three degrees of perpendicular to the surface of the fastened material. Use a depth-setting nosepiece to avoid over-driving, and do not over-tighten. Variants with bonded washers should not have the rubber compressed to less than two-thirds of its uncompressed height. Care should be taken when engaging and disengaging from the fastener head to avoid damage to the protective coating.
Handling	Fasteners may have sharp edges, and the use of power tools can be dangerous. Use personal protective equipment. Store fasteners in dry conditions. Inspect each fastener before use and do not use damaged fasteners.