MatchFast® 30mm stainless mainfix fastener, 15mm washer
A2/304 grade stainless steel fastener for fixing to steel 1.5 - 5.0mm thick
Supplied pre-assembled with an Aluminium / EPDM rubber 15mm diameter sealing washer, normally used in wall applications.
Estimated lead times
4-6 Days
Estimated lead times
4-6 Days
Product Code
MF6-SS-A15-5.5 x 30
Lead Time
4-6 Days
Your price
Per 100
Qty
£0.37
(ex.VAT)
(ex.VAT)
Create New Favourites List
Key Features
Specification
Capacity
Performance
Installation
Downloads
Description
Stainless steel fastener for fixing single skin sheeting.
Suitable for fixing multiple layers of steel up to 6mm thick.
Can be also used in general purpose applications e.g. fixing aluminium.
Features
- Genuine A2 grade stainless steel
- Excellent drilling and tapping performance
- Consistently high pull-out and shear values
- Supplied pre-assembled with an Aluminium / EPDM rubber 15mm diameter sealing washer, normally used in wall applications
Application
- For mechanically fixing metal sheeting systems up to 5mm thickness metal purlins and rails
Fastener Material
Fastener
Austenitic Stainless Steel A2 Grade (304) with organic coating
Sealing Washer
A15 Washer
Durability Class
|
Years / Environment
|
|||||||
|---|---|---|---|---|---|---|---|
| Interior | Semi-interior | Rural | Urban | Industrial / Coastal | Marine | Swimming pools & Chemical plants | |
| Corrosivity Category | C1 | - | C2 | C3 | C4 | C5 | - |
| Austenitic Stainless Steel A2 Grade (304) | 30 | 25 | 25 | 25 | 15 | 0 | 0 |
Dimensions
Diameter
5.5 mm
Length (mm)
30 mm
Effective Thread Length (Min)
0 mm
Effective Thread Length (Max)
8 mm
Head Style
Bi-Hex 11mm
Drilling Capacity
Steel
1.5 mm
5 mm
Effective thread length
Fastener Shear Performance VR,K
|
Substrate
Steel
|
1.5 mm |
| Steel | |
| 0.5 mm | 1.95 kN |
Fastener pull-out performance
| NR,II,K (Tensile - Pull-out) | 1.5mm Steel: 2.30 kN |
| 4mm Steel: 10.74 kN | |
| 6mm Steel: 11.95 kN |
Fastener Pullover Performance NR,K
|
Substrate
Steel
|
A15 Washer |
| Steel | 3 mm |
| 0.5 mm | 3.38 kN |
| 0.7 mm | 4.78 kN |
Installation and handling
| Installation tool | Variable speed electric screwdriver |
| Installation drive | Fixfast Matchfast MF1165 |
| Installation speed | 1500 RPM |
| Correct installation | Fasteners should be driven within three degrees of perpendicular to the surface of the fastened material. Use a depth-setting nosepiece to avoid over-driving, and do not over-tighten. Variants with bonded washers should not have the rubber compressed to less than two-thirds of its uncompressed height. Care should be taken when engaging and disengaging from the fastener head to avoid damage to the protective coating. |
| Handling | Fasteners may have sharp edges, and the use of power tools can be dangerous. Use personal protective equipment. Store fasteners in dry conditions. Inspect each fastener before use and do not use damaged fasteners. |
Key Features
Description
Stainless steel fastener for fixing single skin sheeting.
Suitable for fixing multiple layers of steel up to 6mm thick.
Can be also used in general purpose applications e.g. fixing aluminium.
Features
- Genuine A2 grade stainless steel
- Excellent drilling and tapping performance
- Consistently high pull-out and shear values
- Supplied pre-assembled with an Aluminium / EPDM rubber 15mm diameter sealing washer, normally used in wall applications
Application
- For mechanically fixing metal sheeting systems up to 5mm thickness metal purlins and rails
Specification
Fastener Material
Fastener
Austenitic Stainless Steel A2 Grade (304) with organic coating
Sealing Washer
A15 Washer
Durability Class
|
Years / Environment
|
|||||||
|---|---|---|---|---|---|---|---|
| Interior | Semi-interior | Rural | Urban | Industrial / Coastal | Marine | Swimming pools & Chemical plants | |
| Corrosivity Category | C1 | - | C2 | C3 | C4 | C5 | - |
| Austenitic Stainless Steel A2 Grade (304) | 30 | 25 | 25 | 25 | 15 | 0 | 0 |
Dimensions
Diameter
5.5 mm
Length (mm)
30 mm
Effective Thread Length (Min)
0 mm
Effective Thread Length (Max)
8 mm
Head Style
Bi-Hex 11mm
Drilling Capacity
Steel
1.5 mm
5 mm
Capacity
Effective thread length
Performance
Fastener Shear Performance VR,K
|
Substrate
Steel
|
1.5 mm |
| Steel | |
| 0.5 mm | 1.95 kN |
Fastener pull-out performance
| NR,II,K (Tensile - Pull-out) | 1.5mm Steel: 2.30 kN |
| 4mm Steel: 10.74 kN | |
| 6mm Steel: 11.95 kN |
Fastener Pullover Performance NR,K
|
Substrate
Steel
|
A15 Washer |
| Steel | 3 mm |
| 0.5 mm | 3.38 kN |
| 0.7 mm | 4.78 kN |
Installation
Installation and handling
| Installation tool | Variable speed electric screwdriver |
| Installation drive | Fixfast Matchfast MF1165 |
| Installation speed | 1500 RPM |
| Correct installation | Fasteners should be driven within three degrees of perpendicular to the surface of the fastened material. Use a depth-setting nosepiece to avoid over-driving, and do not over-tighten. Variants with bonded washers should not have the rubber compressed to less than two-thirds of its uncompressed height. Care should be taken when engaging and disengaging from the fastener head to avoid damage to the protective coating. |
| Handling | Fasteners may have sharp edges, and the use of power tools can be dangerous. Use personal protective equipment. Store fasteners in dry conditions. Inspect each fastener before use and do not use damaged fasteners. |
Downloads