MatchFast® A4/316 stainless 6.3mm diameter stitching fastener, 19mm Washer
A4/316 grade stainless steel stitching moulded fasteners, supplied pre-assembled with a stainless / EPDM rubber 19mm diameter sealing washer, normally used in roof applications.
Certified by
Estimated lead times
4-6 Days
Certified by
Estimated lead times
4-6 Days
Product Code
MF2-SSA4-S19-6.3 x 25
Lead Time
4-6 Days
Your price
Qty
£0.40
(ex.VAT)
(ex.VAT)
Create New Favourites List
Key Features
Specification
Capacity
Performance
Installation
Downloads
Description
Stainless steel nylon moulded head fasteners for steel sheet stitching.
Order information: We can supply or match almost any RAL, BS or NCS colour, please call 0800 304 7616 if the colour you require is not available on the colour drop down.
Features & Benefits
- Precisely matched colour head
- Genuine A4 stainless steel for ultimate corrosion resistance
- Free spin zone prevents thread stripping out
- Supplied pre-assembled with a stainless / EPDM rubber 19mm diameter sealing washer, normally used in roof applications
Application
- For mechanically fixing (stitching) two metal sheets up to 1mm thick together
Fastener Material
Fastener
Austenitic Stainless Steel A4 Grade (316) with organic coating
Sealing Washer
S19 washer
Durability Class
|
Years / Environment
|
||||||
|---|---|---|---|---|---|---|
| Interior | Rural | Urban | Industrial / Coastal | Marine | Swimming pools & Chemical plants | |
| Corrosivity Category | C1 | C2 | C3 | C4 | C5 | - |
| Austenitic Stainless Steel A4 Grade (316) | 40 | 40 | 40 | 25 | 25 | 0 |
Dimensions
Diameter
6.3 mm
Length (mm)
25 mm
Effective Thread Length (Min)
0.8 mm
Effective Thread Length (Max)
2 mm
Head Style
Bi-Hex 11mm
Build-up
Effective thread length
Fastener Shear Performance VR,K
|
Substrate
Steel
|
0.5 mm |
| Steel | |
| 0.5 mm | 1.05 kN |
Fastener pull-out performance
| NR,II,K (Tensile - Pull-out) | 0.5mm Steel: 0.6 kN |
Fastener Pullover Performance NR,K
|
Substrate
Steel
|
S19 washer |
| Steel | 0.5 mm |
| 0.5 mm | 3.6 kN |
Installation and handling
| Installation tool | Variable speed electric screw gun |
| Installation drive | Fixfast Matchfast MF1165 |
| Installation speed | 1500 RPM |
| Correct installation | Fasteners should be driven within three degrees of perpendicular to the surface of the fastened material. Use a depth-setting nosepiece to avoid over-driving, and do not over-tighten. Variants with bonded washers should not have the rubber compressed to less than two-thirds of its uncompressed height. Care should be taken when engaging and disengaging from the fastener head to avoid damage to the protective coating. |
| Handling | Fasteners may have sharp edges, and the use of power tools can be dangerous. Use personal protective equipment. Store fasteners in dry conditions. Inspect each fastener before use and do not use damaged fasteners. |
Downloads
Please see the below files available to download for this product
Key Features
Description
Stainless steel nylon moulded head fasteners for steel sheet stitching.
Order information: We can supply or match almost any RAL, BS or NCS colour, please call 0800 304 7616 if the colour you require is not available on the colour drop down.
Features & Benefits
- Precisely matched colour head
- Genuine A4 stainless steel for ultimate corrosion resistance
- Free spin zone prevents thread stripping out
- Supplied pre-assembled with a stainless / EPDM rubber 19mm diameter sealing washer, normally used in roof applications
Application
- For mechanically fixing (stitching) two metal sheets up to 1mm thick together
Specification
Fastener Material
Fastener
Austenitic Stainless Steel A4 Grade (316) with organic coating
Sealing Washer
S19 washer
Durability Class
|
Years / Environment
|
||||||
|---|---|---|---|---|---|---|
| Interior | Rural | Urban | Industrial / Coastal | Marine | Swimming pools & Chemical plants | |
| Corrosivity Category | C1 | C2 | C3 | C4 | C5 | - |
| Austenitic Stainless Steel A4 Grade (316) | 40 | 40 | 40 | 25 | 25 | 0 |
Dimensions
Diameter
6.3 mm
Length (mm)
25 mm
Effective Thread Length (Min)
0.8 mm
Effective Thread Length (Max)
2 mm
Head Style
Bi-Hex 11mm
Capacity
Build-up
Effective thread length
Performance
Fastener Shear Performance VR,K
|
Substrate
Steel
|
0.5 mm |
| Steel | |
| 0.5 mm | 1.05 kN |
Fastener pull-out performance
| NR,II,K (Tensile - Pull-out) | 0.5mm Steel: 0.6 kN |
Fastener Pullover Performance NR,K
|
Substrate
Steel
|
S19 washer |
| Steel | 0.5 mm |
| 0.5 mm | 3.6 kN |
Installation
Installation and handling
| Installation tool | Variable speed electric screw gun |
| Installation drive | Fixfast Matchfast MF1165 |
| Installation speed | 1500 RPM |
| Correct installation | Fasteners should be driven within three degrees of perpendicular to the surface of the fastened material. Use a depth-setting nosepiece to avoid over-driving, and do not over-tighten. Variants with bonded washers should not have the rubber compressed to less than two-thirds of its uncompressed height. Care should be taken when engaging and disengaging from the fastener head to avoid damage to the protective coating. |
| Handling | Fasteners may have sharp edges, and the use of power tools can be dangerous. Use personal protective equipment. Store fasteners in dry conditions. Inspect each fastener before use and do not use damaged fasteners. |
Downloads
Downloads
Please see the below files available to download for this product
