Carbon steel moulded fastener for fixing to heavy section steel, supplied pre-assembled with an Aluminium / EPDM rubber 19mm diameter sealing washer, normally used in roof applications.
Standard stock colours are available for next day delivery, special colours have an extended lead time which will be confirmed on your order acknowledgement - please call us if you wish to confirm a lead time before ordering.
![](/media/akeneo_connector/reference_entities/records/F/i/FixFast_11_23_Drillfast_high_res_0c39.jpg)
![](/media/akeneo_connector/reference_entities/records/c/e/ce_mark_0_1__495f.png)
Estimated lead times
1-4 Days
![MatchFast® 40mm carbon steel heavy section mainfix fastener, 19mm washer main product photo](https://www.fixfast.com/media/catalog/product/cache/3cf72d4c7a492e0403a39e264af2d130/M/F/MF12-A19-5-5-x-40_2.jpg)
![](/media/akeneo_connector/reference_entities/records/F/i/FixFast_11_23_Drillfast_high_res_0c39.jpg)
![](/media/akeneo_connector/reference_entities/records/c/e/ce_mark_0_1__495f.png)
Estimated lead times
1-4 Days
Carbon steel nylon moulded head self drilling fasteners for single skin sheeting to heavy steel.
Features
- Precisely matched colour head
- Unique Enduroguard coating for excellent corrosion resistance
- Purpose designed for easy and effective installations
- Supplied pre-assembled with an Aluminium / EPDM rubber 19mm diameter sealing washer, normally used for roof applications
- For mechanically fixing steel sheeting systems to heavy steel purlins and sections
Years / Environment
|
|||||||
---|---|---|---|---|---|---|---|
Interior | Semi-interior | Rural | Urban | Industrial / Coastal | Marine | Swimming pools & Chemical plants | |
Corrosivity Category | C1 | - | C2 | C3 | C4 | C5 | - |
Carbon steel case hardened | 25 | 20 | 12 | 0 | 0 | 0 | 0 |
Substrate
Steel
|
4 mm |
Steel | |
0.5 mm | 2.34 kN |
NR,II,K (Tensile - Pull-out) | 4mm Steel: 5.44 kN |
6mm Steel: 12.75 kN | |
8mm Steel: 13.92 kN |
Substrate
Steel
|
A19 Washer |
Steel | 4 mm |
0.5 mm | 3.38 kN |
Installation tool | Variable speed electric screwdriver |
Installation drive | Fixfast Matchfast MF1165 |
Installation speed | 1500 RPM |
Correct installation | Fasteners should be driven within three degrees of perpendicular to the surface of the fastened material. Use a depth-setting nosepiece to avoid over-driving, and do not over-tighten. Variants with bonded washers should not have the rubber compressed to less than two-thirds of its uncompressed height. Care should be taken when engaging and disengaging from the fastener head to avoid damage to the protective coating. |
Handling | Fasteners may have sharp edges, and the use of power tools can be dangerous. Use personal protective equipment. Store fasteners in dry conditions. Inspect each fastener before use and do not use damaged fasteners. |
Carbon steel nylon moulded head self drilling fasteners for single skin sheeting to heavy steel.
Features
- Precisely matched colour head
- Unique Enduroguard coating for excellent corrosion resistance
- Purpose designed for easy and effective installations
- Supplied pre-assembled with an Aluminium / EPDM rubber 19mm diameter sealing washer, normally used for roof applications
- For mechanically fixing steel sheeting systems to heavy steel purlins and sections
Years / Environment
|
|||||||
---|---|---|---|---|---|---|---|
Interior | Semi-interior | Rural | Urban | Industrial / Coastal | Marine | Swimming pools & Chemical plants | |
Corrosivity Category | C1 | - | C2 | C3 | C4 | C5 | - |
Carbon steel case hardened | 25 | 20 | 12 | 0 | 0 | 0 | 0 |
Substrate
Steel
|
4 mm |
Steel | |
0.5 mm | 2.34 kN |
NR,II,K (Tensile - Pull-out) | 4mm Steel: 5.44 kN |
6mm Steel: 12.75 kN | |
8mm Steel: 13.92 kN |
Substrate
Steel
|
A19 Washer |
Steel | 4 mm |
0.5 mm | 3.38 kN |
Installation tool | Variable speed electric screwdriver |
Installation drive | Fixfast Matchfast MF1165 |
Installation speed | 1500 RPM |
Correct installation | Fasteners should be driven within three degrees of perpendicular to the surface of the fastened material. Use a depth-setting nosepiece to avoid over-driving, and do not over-tighten. Variants with bonded washers should not have the rubber compressed to less than two-thirds of its uncompressed height. Care should be taken when engaging and disengaging from the fastener head to avoid damage to the protective coating. |
Handling | Fasteners may have sharp edges, and the use of power tools can be dangerous. Use personal protective equipment. Store fasteners in dry conditions. Inspect each fastener before use and do not use damaged fasteners. |