A4/316 grade stainless steel lacquered fastener for fixing to light metal purlins and rails.
Supplied pre-assembled with a stainless steel / EPDM rubber 15mm diameter sealing washer, normally used in wall applications.
Estimated lead times
2-3 Days
Estimated lead times
2-3 Days
Estimated lead times
2-3 Days
Estimated lead times
2-3 Days
Estimated lead times
2-3 Days
Estimated lead times
2-3 Days
Estimated lead times
2-3 Days
Estimated lead times
2-3 Days
Low profile stainless steel fasteners for use in single skin sheeting, facade and rainscreens and flashing / trim detail applications.
Features
- A4/316 stainless steel for corrosion resistance
- Low profile painted head to complement the best in modern construction techniques
- Specialist RedDrive installation tool for optimum performance
- Supplied pre-assembled with a 15mm stainless steel / EPDM bonded sealing washer, normally used for wall / vertical applications
- Available in almost any RAL, BS, or NCS colour, please call us if the colour you require isn't on the drop down list
- For mechanically fixing components of steel, aluminium and metal framing systems
- For mechanically fixing metal sheeting systems to light metal purlins and rails
Years / Environment
|
|||||||
---|---|---|---|---|---|---|---|
Interior | Semi-interior | Rural | Urban | Industrial / Coastal | Marine | Swimming pools & Chemical plants | |
Corrosivity Category | C1 | - | C2 | C3 | C4 | C5 | - |
Austenitic Stainless Steel A4 Grade (316) | 40 | 40 | 40 | 40 | 30 | 25 | 0 |
Years / Environment
|
|||||||
---|---|---|---|---|---|---|---|
Interior | Semi-interior | Rural | Urban | Industrial / Coastal | Marine | Swimming pools & Chemical plants | |
Corrosivity Category | C1 | - | C2 | C3 | C4 | C5 | - |
Austenitic Stainless Steel A4 Grade (316) | 40 | 40 | 40 | 40 | 30 | 25 | 0 |
Years / Environment
|
|||||||
---|---|---|---|---|---|---|---|
Interior | Semi-interior | Rural | Urban | Industrial / Coastal | Marine | Swimming pools & Chemical plants | |
Corrosivity Category | C1 | - | C2 | C3 | C4 | C5 | - |
Austenitic Stainless Steel A4 Grade (316) | 40 | 40 | 40 | 40 | 30 | 25 | 0 |
Years / Environment
|
|||||||
---|---|---|---|---|---|---|---|
Interior | Semi-interior | Rural | Urban | Industrial / Coastal | Marine | Swimming pools & Chemical plants | |
Corrosivity Category | C1 | - | C2 | C3 | C4 | C5 | - |
Austenitic Stainless Steel A4 Grade (316) | 40 | 40 | 40 | 40 | 30 | 25 | 0 |
Years / Environment
|
|||||||
---|---|---|---|---|---|---|---|
Interior | Semi-interior | Rural | Urban | Industrial / Coastal | Marine | Swimming pools & Chemical plants | |
Corrosivity Category | C1 | - | C2 | C3 | C4 | C5 | - |
Austenitic Stainless Steel A4 Grade (316) | 40 | 40 | 40 | 40 | 30 | 25 | 0 |
Substrate
Steel
|
1.2 mm |
Steel | |
0.5 mm | 1.97 kN |
NR,II,K (Tensile - Pull-out) | 1.2mm Steel: 1.43 kN |
2mm Steel: 2.62 kN | |
3mm Steel: 4.76 kN |
Substrate
Steel
|
S15 washer |
Steel | 3 mm |
0.5 mm | 3.81 kN |
0.7 mm | 3.94 kN |
Substrate
Steel
|
1.2 mm |
Steel | |
0.5 mm | 1.97 kN |
NR,II,K (Tensile - Pull-out) | 1.2mm Steel: 1.43 kN |
2mm Steel: 2.62 kN | |
3mm Steel: 4.76 kN |
Substrate
Steel
|
S15 washer |
Steel | 3 mm |
0.5 mm | 3.81 kN |
0.7 mm | 3.94 kN |
Substrate
Steel
|
1.2 mm |
Steel | |
0.5 mm | 1.97 kN |
NR,II,K (Tensile - Pull-out) | 1.2mm Steel: 1.43 kN |
2mm Steel: 2.62 kN | |
3mm Steel: 4.76 kN |
Substrate
Steel
|
S15 washer |
Steel | 3 mm |
0.5 mm | 3.81 kN |
0.7 mm | 3.94 kN |
Substrate
Steel
|
1.2 mm |
Steel | |
0.5 mm | 1.97 kN |
NR,II,K (Tensile - Pull-out) | 1.2mm Steel: 1.43 kN |
2mm Steel: 2.62 kN | |
3mm Steel: 4.76 kN |
Substrate
Steel
|
S15 washer |
Steel | 3 mm |
0.5 mm | 3.81 kN |
0.7 mm | 3.94 kN |
Substrate
Steel
|
1.2 mm |
Steel | |
0.5 mm | 1.97 kN |
NR,II,K (Tensile - Pull-out) | 1.2mm Steel: 1.43 kN |
2mm Steel: 2.62 kN | |
3mm Steel: 4.76 kN |
Substrate
Steel
|
S15 washer |
Steel | 3 mm |
0.5 mm | 3.81 kN |
0.7 mm | 3.94 kN |
Installation tool | Variable speed electric screwdriver |
Installation drive | Fixfast RedDrive |
Installation speed | 1500 RPM |
Correct installation | Fasteners should be driven within three degrees of perpendicular to the surface of the fastened material. Use a depth-setting nosepiece to avoid over-driving, and do not over-tighten. Variants with bonded washers should not have the rubber compressed to less than two-thirds of its uncompressed height. Care should be taken when engaging and disengaging from the fastener head to avoid damage to the protective coating. |
Handling | Fasteners may have sharp edges, and the use of power tools can be dangerous. Use personal protective equipment. Store fasteners in dry conditions. Inspect each fastener before use and do not use damaged fasteners. |
Low profile stainless steel fasteners for use in single skin sheeting, facade and rainscreens and flashing / trim detail applications.
Features
- A4/316 stainless steel for corrosion resistance
- Low profile painted head to complement the best in modern construction techniques
- Specialist RedDrive installation tool for optimum performance
- Supplied pre-assembled with a 15mm stainless steel / EPDM bonded sealing washer, normally used for wall / vertical applications
- Available in almost any RAL, BS, or NCS colour, please call us if the colour you require isn't on the drop down list
- For mechanically fixing components of steel, aluminium and metal framing systems
- For mechanically fixing metal sheeting systems to light metal purlins and rails
Years / Environment
|
|||||||
---|---|---|---|---|---|---|---|
Interior | Semi-interior | Rural | Urban | Industrial / Coastal | Marine | Swimming pools & Chemical plants | |
Corrosivity Category | C1 | - | C2 | C3 | C4 | C5 | - |
Austenitic Stainless Steel A4 Grade (316) | 40 | 40 | 40 | 40 | 30 | 25 | 0 |
Years / Environment
|
|||||||
---|---|---|---|---|---|---|---|
Interior | Semi-interior | Rural | Urban | Industrial / Coastal | Marine | Swimming pools & Chemical plants | |
Corrosivity Category | C1 | - | C2 | C3 | C4 | C5 | - |
Austenitic Stainless Steel A4 Grade (316) | 40 | 40 | 40 | 40 | 30 | 25 | 0 |
Years / Environment
|
|||||||
---|---|---|---|---|---|---|---|
Interior | Semi-interior | Rural | Urban | Industrial / Coastal | Marine | Swimming pools & Chemical plants | |
Corrosivity Category | C1 | - | C2 | C3 | C4 | C5 | - |
Austenitic Stainless Steel A4 Grade (316) | 40 | 40 | 40 | 40 | 30 | 25 | 0 |
Years / Environment
|
|||||||
---|---|---|---|---|---|---|---|
Interior | Semi-interior | Rural | Urban | Industrial / Coastal | Marine | Swimming pools & Chemical plants | |
Corrosivity Category | C1 | - | C2 | C3 | C4 | C5 | - |
Austenitic Stainless Steel A4 Grade (316) | 40 | 40 | 40 | 40 | 30 | 25 | 0 |
Years / Environment
|
|||||||
---|---|---|---|---|---|---|---|
Interior | Semi-interior | Rural | Urban | Industrial / Coastal | Marine | Swimming pools & Chemical plants | |
Corrosivity Category | C1 | - | C2 | C3 | C4 | C5 | - |
Austenitic Stainless Steel A4 Grade (316) | 40 | 40 | 40 | 40 | 30 | 25 | 0 |