A4/316 grade stainless steel lacquered composite panel fastener for fixing to light section steel. Supplied pre-assembled with a 19mm washer, normally used in roof applications.
Estimated lead times
2-3 Days
Estimated lead times
2-3 Days
Estimated lead times
2-3 Days
Estimated lead times
2-3 Days
Estimated lead times
2-3 Days
Estimated lead times
2-3 Days
Estimated lead times
2-3 Days
Estimated lead times
2-3 Days
Low profile stainless steel high thread fasteners for fixing composite panel systems.
Features
- High thread provides optimal clamping force to top sheet
- A4/316 grade stainless steel for corrosion resistance
- Free spin zone prevents thread strip out under normal installation conditions
- Specialist RedDrive installation tool
- Supplied pre-assembled with a stainless steel / EPDM rubber 19mm diameter sealing washer, normally used roofing applications
- Polyester powder coated head for precise colour match
- For mechanically fixing composite panel systems to light metal purlins and rails, and timber
Years / Environment
|
|||||||
---|---|---|---|---|---|---|---|
Interior | Semi-interior | Rural | Urban | Industrial / Coastal | Marine | Swimming pools & Chemical plants | |
Corrosivity Category | C1 | - | C2 | C3 | C4 | C5 | - |
Austenitic Stainless Steel A4 Grade (316) | 40 | 40 | 40 | 40 | 30 | 25 | 0 |
Years / Environment
|
|||||||
---|---|---|---|---|---|---|---|
Interior | Semi-interior | Rural | Urban | Industrial / Coastal | Marine | Swimming pools & Chemical plants | |
Corrosivity Category | C1 | - | C2 | C3 | C4 | C5 | - |
Austenitic Stainless Steel A4 Grade (316) | 40 | 40 | 40 | 40 | 30 | 25 | 0 |
Years / Environment
|
|||||||
---|---|---|---|---|---|---|---|
Interior | Semi-interior | Rural | Urban | Industrial / Coastal | Marine | Swimming pools & Chemical plants | |
Corrosivity Category | C1 | - | C2 | C3 | C4 | C5 | - |
Austenitic Stainless Steel A4 Grade (316) | 40 | 40 | 40 | 40 | 30 | 25 | 0 |
Years / Environment
|
|||||||
---|---|---|---|---|---|---|---|
Interior | Semi-interior | Rural | Urban | Industrial / Coastal | Marine | Swimming pools & Chemical plants | |
Corrosivity Category | C1 | - | C2 | C3 | C4 | C5 | - |
Austenitic Stainless Steel A4 Grade (316) | 40 | 40 | 40 | 40 | 30 | 25 | 0 |
Years / Environment
|
|||||||
---|---|---|---|---|---|---|---|
Interior | Semi-interior | Rural | Urban | Industrial / Coastal | Marine | Swimming pools & Chemical plants | |
Corrosivity Category | C1 | - | C2 | C3 | C4 | C5 | - |
Austenitic Stainless Steel A4 Grade (316) | 40 | 40 | 40 | 40 | 30 | 25 | 0 |
Substrate
Composite panel
|
1.2 mm |
Steel | |
0.5 mm | 0.98 kN |
NR,II,K (Tensile - Pull-out) | 1.2mm Steel: 1.43 kN |
2mm Steel: 2.75 kN | |
3mm Steel: 4.90 kN | |
Softwood C16: 2.68 kN |
Substrate
Steel
|
S19 washer |
Steel | 3 mm |
0.5 mm | 3.28 kN |
Substrate
Composite panel
|
1.2 mm |
Steel | |
0.5 mm | 0.98 kN |
NR,II,K (Tensile - Pull-out) | 1.2mm Steel: 1.43 kN |
2mm Steel: 2.75 kN | |
3mm Steel: 4.90 kN | |
Softwood C16: 2.68 kN |
Substrate
Steel
|
S19 washer |
Steel | 3 mm |
0.5 mm | 3.28 kN |
Substrate
Composite panel
|
1.2 mm |
Steel | |
0.5 mm | 0.98 kN |
NR,II,K (Tensile - Pull-out) | 1.2mm Steel: 1.43 kN |
2mm Steel: 2.75 kN | |
3mm Steel: 4.90 kN | |
Softwood C16: 2.68 kN |
Substrate
Steel
|
S19 washer |
Steel | 3 mm |
0.5 mm | 3.28 kN |
Substrate
Composite panel
|
1.2 mm |
Steel | |
0.5 mm | 0.98 kN |
NR,II,K (Tensile - Pull-out) | 1.2mm Steel: 1.43 kN |
2mm Steel: 2.75 kN | |
3mm Steel: 4.90 kN | |
Softwood C16: 2.68 kN |
Substrate
Steel
|
S19 washer |
Steel | 3 mm |
0.5 mm | 3.28 kN |
Substrate
Composite panel
|
1.2 mm |
Steel | |
0.5 mm | 0.98 kN |
NR,II,K (Tensile - Pull-out) | 1.2mm Steel: 1.43 kN |
2mm Steel: 2.75 kN | |
3mm Steel: 4.90 kN | |
Softwood C16: 2.68 kN |
Substrate
Steel
|
S19 washer |
Steel | 3 mm |
0.5 mm | 3.28 kN |
Installation tool | Variable speed electric screwdriver |
Installation drive | Fixfast RedDrive |
Installation speed | 1500 RPM |
Correct installation | Fasteners should be driven within three degrees of perpendicular to the surface of the fastened material. Use a depth-setting nosepiece to avoid over-driving, and do not over-tighten. Variants with bonded washers should not have the rubber compressed to less than two-thirds of its uncompressed height. Care should be taken when engaging and disengaging from the fastener head to avoid damage to the protective coating. |
Handling | Fasteners may have sharp edges, and the use of power tools can be dangerous. Use personal protective equipment. Store fasteners in dry conditions. Inspect each fastener before use and do not use damaged fasteners. |
Low profile stainless steel high thread fasteners for fixing composite panel systems.
Features
- High thread provides optimal clamping force to top sheet
- A4/316 grade stainless steel for corrosion resistance
- Free spin zone prevents thread strip out under normal installation conditions
- Specialist RedDrive installation tool
- Supplied pre-assembled with a stainless steel / EPDM rubber 19mm diameter sealing washer, normally used roofing applications
- Polyester powder coated head for precise colour match
- For mechanically fixing composite panel systems to light metal purlins and rails, and timber
Years / Environment
|
|||||||
---|---|---|---|---|---|---|---|
Interior | Semi-interior | Rural | Urban | Industrial / Coastal | Marine | Swimming pools & Chemical plants | |
Corrosivity Category | C1 | - | C2 | C3 | C4 | C5 | - |
Austenitic Stainless Steel A4 Grade (316) | 40 | 40 | 40 | 40 | 30 | 25 | 0 |
Years / Environment
|
|||||||
---|---|---|---|---|---|---|---|
Interior | Semi-interior | Rural | Urban | Industrial / Coastal | Marine | Swimming pools & Chemical plants | |
Corrosivity Category | C1 | - | C2 | C3 | C4 | C5 | - |
Austenitic Stainless Steel A4 Grade (316) | 40 | 40 | 40 | 40 | 30 | 25 | 0 |
Years / Environment
|
|||||||
---|---|---|---|---|---|---|---|
Interior | Semi-interior | Rural | Urban | Industrial / Coastal | Marine | Swimming pools & Chemical plants | |
Corrosivity Category | C1 | - | C2 | C3 | C4 | C5 | - |
Austenitic Stainless Steel A4 Grade (316) | 40 | 40 | 40 | 40 | 30 | 25 | 0 |
Years / Environment
|
|||||||
---|---|---|---|---|---|---|---|
Interior | Semi-interior | Rural | Urban | Industrial / Coastal | Marine | Swimming pools & Chemical plants | |
Corrosivity Category | C1 | - | C2 | C3 | C4 | C5 | - |
Austenitic Stainless Steel A4 Grade (316) | 40 | 40 | 40 | 40 | 30 | 25 | 0 |
Years / Environment
|
|||||||
---|---|---|---|---|---|---|---|
Interior | Semi-interior | Rural | Urban | Industrial / Coastal | Marine | Swimming pools & Chemical plants | |
Corrosivity Category | C1 | - | C2 | C3 | C4 | C5 | - |
Austenitic Stainless Steel A4 Grade (316) | 40 | 40 | 40 | 40 | 30 | 25 | 0 |