DrillFast® 45mm stainless halter fastener for steel, 15mm washer
A2/304 grade stainless steel halter fastener for fixing to light section steel.
Supplied pre-assembled with an Aluminium / EPDM rubber 15mm diameter sealing washer.
Certified by
Estimated lead times
1 Day
calcPageSize())"
/>
Certified by
Estimated lead times
1 Day
Product Code
DF3-SS-A15-6.0 x 45
Lead Time
1 Day
Your price
Per 100
Qty
0 ? qty - step : step; $dispatch('update-qty-317', qty)">
£0.39
(ex.VAT)
(ex.VAT)
Create New Favourites List
Key Features
Specification
Capacity
Performance
Installation
Downloads
Description
For fastening clips and halter to steel purlins and rails up to 3mm thick
Features
- Genuine A2 / 304 grade stainless steel for corrosion resistance
- Bi-metal manufactured for superior drilling performance
- Excellent pull-out and shear resistance
- Supplied pre-assembled with an Aluminium / EPDM rubber 15mm diameter sealing washer.
Application
- For mechanically fixing clips and halters to steel and timber purlins and rails
- DF3 - for fastening into steel 1.2 - 3.0mm thick
Fastener Material
Fastener
Austenitic Stainless Steel A2 Grade (304) with organic coating
Sealing Washer
A15 Washer
Durability Class
Years / Environment
|
|||||||
---|---|---|---|---|---|---|---|
Interior | Semi-interior | Rural | Urban | Industrial / Coastal | Marine | Swimming pools & Chemical plants | |
Corrosivity Category | C1 | - | C2 | C3 | C4 | C5 | - |
Austenitic Stainless Steel A2 Grade (304) | 30 | 25 | 25 | 25 | 15 | 0 | 0 |
Dimensions
Diameter
6 mm
Length (mm)
45 mm
Effective Thread Length (Min)
0 mm
Effective Thread Length (Max)
21 mm
Head Style
Hexagon 8mm
Drilling Capacity
Steel
1.2 mm
3 mm
Build-up
Effective thread length
Fastener Shear Performance VR,K
Substrate
Steel
|
1.2 mm |
Steel | |
0.5 mm | 2.03 kN |
Fastener pull-out performance
NR,II,K (Tensile - Pull-out) | 1.5mm Steel: 2.19 kN |
2mm Steel: 3.06 kN | |
3mm Steel: 6.37 kN |
Installation and handling
Installation tool | Variable speed electric screwdriver |
Installation drive | Fixfast GreenDrive (8mm hex integral socket with retaining clip) |
Installation speed | 1500 RPM |
Correct installation | Fasteners should be driven within three degrees of perpendicular to the surface of the fastened material. Use a depth-setting nosepiece to avoid over-driving, and do not over-tighten. Variants with bonded washers should not have the rubber compressed to less than two-thirds of its uncompressed height. Care should be taken when engaging and disengaging from the fastener head to avoid damage to the protective coating. |
Handling | Fasteners may have sharp edges, and the use of power tools can be dangerous. Use personal protective equipment. Store fasteners in dry conditions. Inspect each fastener before use and do not use damaged fasteners. |
Key Features
Description
For fastening clips and halter to steel purlins and rails up to 3mm thick
Features
- Genuine A2 / 304 grade stainless steel for corrosion resistance
- Bi-metal manufactured for superior drilling performance
- Excellent pull-out and shear resistance
- Supplied pre-assembled with an Aluminium / EPDM rubber 15mm diameter sealing washer.
Application
- For mechanically fixing clips and halters to steel and timber purlins and rails
- DF3 - for fastening into steel 1.2 - 3.0mm thick
Specification
Fastener Material
Fastener
Austenitic Stainless Steel A2 Grade (304) with organic coating
Sealing Washer
A15 Washer
Durability Class
Years / Environment
|
|||||||
---|---|---|---|---|---|---|---|
Interior | Semi-interior | Rural | Urban | Industrial / Coastal | Marine | Swimming pools & Chemical plants | |
Corrosivity Category | C1 | - | C2 | C3 | C4 | C5 | - |
Austenitic Stainless Steel A2 Grade (304) | 30 | 25 | 25 | 25 | 15 | 0 | 0 |
Dimensions
Diameter
6 mm
Length (mm)
45 mm
Effective Thread Length (Min)
0 mm
Effective Thread Length (Max)
21 mm
Head Style
Hexagon 8mm
Drilling Capacity
Steel
1.2 mm
3 mm
Capacity
Build-up
Effective thread length
Performance
Fastener Shear Performance VR,K
Substrate
Steel
|
1.2 mm |
Steel | |
0.5 mm | 2.03 kN |
Fastener pull-out performance
NR,II,K (Tensile - Pull-out) | 1.5mm Steel: 2.19 kN |
2mm Steel: 3.06 kN | |
3mm Steel: 6.37 kN |
Installation
Installation and handling
Installation tool | Variable speed electric screwdriver |
Installation drive | Fixfast GreenDrive (8mm hex integral socket with retaining clip) |
Installation speed | 1500 RPM |
Correct installation | Fasteners should be driven within three degrees of perpendicular to the surface of the fastened material. Use a depth-setting nosepiece to avoid over-driving, and do not over-tighten. Variants with bonded washers should not have the rubber compressed to less than two-thirds of its uncompressed height. Care should be taken when engaging and disengaging from the fastener head to avoid damage to the protective coating. |
Handling | Fasteners may have sharp edges, and the use of power tools can be dangerous. Use personal protective equipment. Store fasteners in dry conditions. Inspect each fastener before use and do not use damaged fasteners. |
Downloads
Related Products