A2/304 grade stainless steel fastener for fixing to light metal purlins and rails.
Supplied pre-assembled with an Aluminium / EPDM rubber 15mm diameter sealing washer, normally used in wall applications.
Estimated lead times
1 Day
Estimated lead times
1 Day
Estimated lead times
1 Day
Estimated lead times
1 Day
Estimated lead times
1 Day
Estimated lead times
1 Day
Stainless steel fastener for fixing single skin sheeting to light metal purlins and rails.
Can also be used for fixing back clips, brackets, rails or other items to light steel.
Features
- A2 grade stainless steel provides excellent corrosion resistance
- Excellent drilling and tapping performance, which provides:
- Consistently high pull out and shear values
- Standard 8mm hex head
- Can be supplied pre-assembled with sealing washer - please see below
- Supplied pre-assembled with an Aluminium / EPDM rubber 15mm diameter sealing washer, normally used in wall applications
- For mechanically fixing components of steel, aluminium and metal framing systems
- For mechanically fixing metal sheeting systems to light metal purlins and rails
Years / Environment
|
|||||||
---|---|---|---|---|---|---|---|
Interior | Semi-interior | Rural | Urban | Industrial / Coastal | Marine | Swimming pools & Chemical plants | |
Corrosivity Category | C1 | - | C2 | C3 | C4 | C5 | - |
Austenitic Stainless Steel A2 Grade (304) | 30 | 25 | 25 | 25 | 15 | 0 | 0 |
Years / Environment
|
|||||||
---|---|---|---|---|---|---|---|
Interior | Semi-interior | Rural | Urban | Industrial / Coastal | Marine | Swimming pools & Chemical plants | |
Corrosivity Category | C1 | - | C2 | C3 | C4 | C5 | - |
Austenitic Stainless Steel A2 Grade (304) | 30 | 25 | 25 | 25 | 15 | 0 | 0 |
Years / Environment
|
|||||||
---|---|---|---|---|---|---|---|
Interior | Semi-interior | Rural | Urban | Industrial / Coastal | Marine | Swimming pools & Chemical plants | |
Corrosivity Category | C1 | - | C2 | C3 | C4 | C5 | - |
Austenitic Stainless Steel A2 Grade (304) | 30 | 25 | 25 | 25 | 15 | 0 | 0 |
Years / Environment
|
|||||||
---|---|---|---|---|---|---|---|
Interior | Semi-interior | Rural | Urban | Industrial / Coastal | Marine | Swimming pools & Chemical plants | |
Corrosivity Category | C1 | - | C2 | C3 | C4 | C5 | - |
Austenitic Stainless Steel A2 Grade (304) | 30 | 25 | 25 | 25 | 15 | 0 | 0 |
Substrate
Steel
|
1.2 mm |
Steel | |
0.5 mm | 1.95 kN |
NR,II,K (Tensile - Pull-out) | 1.2mm Steel: 1.30 kN |
2mm Steel: 2.62 kN | |
3mm Steel: 4.76 kN |
Substrate
Steel
|
A15 Washer |
Steel | 3 mm |
0.5 mm | 3.33 kN |
Substrate
Steel
|
1.2 mm |
Steel | |
0.5 mm | 1.95 kN |
NR,II,K (Tensile - Pull-out) | 1.2mm Steel: 1.3 kN |
2mm Steel: 2.62 kN | |
3mm Steel: 4.76 kN |
Substrate
Steel
|
A15 Washer |
Steel | 3 mm |
0.5 mm | 3.33 kN |
Substrate
Steel
|
1.2 mm |
Steel | |
0.5 mm | 1.95 kN |
NR,II,K (Tensile - Pull-out) | 1.2mm Steel: 1.3 kN |
2mm Steel: 2.62 kN | |
3mm Steel: 4.76 kN |
Substrate
Steel
|
A15 Washer |
Steel | 3 mm |
0.5 mm | 3.33 kN |
Substrate
Steel
|
1.2 mm |
Steel | |
0.5 mm | 1.95 kN |
NR,II,K (Tensile - Pull-out) | 1.2mm Steel: 1.3 kN |
2mm Steel: 2.62 kN | |
3mm Steel: 4.76 kN |
Substrate
Steel
|
A15 Washer |
Steel | 3 mm |
0.5 mm | 3.33 kN |
Installation tool | Variable speed electric screwdriver |
Installation drive | Fixfast GreenDrive (8mm hex integral socket with retaining clip) |
Installation speed | 1500 RPM |
Correct installation | Fasteners should be driven within three degrees of perpendicular to the surface of the fastened material. Use a depth-setting nosepiece to avoid over-driving, and do not over-tighten. Variants with bonded washers should not have the rubber compressed to less than two-thirds of its uncompressed height. Care should be taken when engaging and disengaging from the fastener head to avoid damage to the protective coating. |
Handling | Fasteners may have sharp edges, and the use of power tools can be dangerous. Use personal protective equipment. Store fasteners in dry conditions. Inspect each fastener before use and do not use damaged fasteners. |
Stainless steel fastener for fixing single skin sheeting to light metal purlins and rails.
Can also be used for fixing back clips, brackets, rails or other items to light steel.
Features
- A2 grade stainless steel provides excellent corrosion resistance
- Excellent drilling and tapping performance, which provides:
- Consistently high pull out and shear values
- Standard 8mm hex head
- Can be supplied pre-assembled with sealing washer - please see below
- Supplied pre-assembled with an Aluminium / EPDM rubber 15mm diameter sealing washer, normally used in wall applications
- For mechanically fixing components of steel, aluminium and metal framing systems
- For mechanically fixing metal sheeting systems to light metal purlins and rails
Years / Environment
|
|||||||
---|---|---|---|---|---|---|---|
Interior | Semi-interior | Rural | Urban | Industrial / Coastal | Marine | Swimming pools & Chemical plants | |
Corrosivity Category | C1 | - | C2 | C3 | C4 | C5 | - |
Austenitic Stainless Steel A2 Grade (304) | 30 | 25 | 25 | 25 | 15 | 0 | 0 |
Years / Environment
|
|||||||
---|---|---|---|---|---|---|---|
Interior | Semi-interior | Rural | Urban | Industrial / Coastal | Marine | Swimming pools & Chemical plants | |
Corrosivity Category | C1 | - | C2 | C3 | C4 | C5 | - |
Austenitic Stainless Steel A2 Grade (304) | 30 | 25 | 25 | 25 | 15 | 0 | 0 |
Years / Environment
|
|||||||
---|---|---|---|---|---|---|---|
Interior | Semi-interior | Rural | Urban | Industrial / Coastal | Marine | Swimming pools & Chemical plants | |
Corrosivity Category | C1 | - | C2 | C3 | C4 | C5 | - |
Austenitic Stainless Steel A2 Grade (304) | 30 | 25 | 25 | 25 | 15 | 0 | 0 |
Years / Environment
|
|||||||
---|---|---|---|---|---|---|---|
Interior | Semi-interior | Rural | Urban | Industrial / Coastal | Marine | Swimming pools & Chemical plants | |
Corrosivity Category | C1 | - | C2 | C3 | C4 | C5 | - |
Austenitic Stainless Steel A2 Grade (304) | 30 | 25 | 25 | 25 | 15 | 0 | 0 |
Substrate
Steel
|
1.2 mm |
Steel | |
0.5 mm | 1.95 kN |
NR,II,K (Tensile - Pull-out) | 1.2mm Steel: 1.30 kN |
2mm Steel: 2.62 kN | |
3mm Steel: 4.76 kN |
Substrate
Steel
|
A15 Washer |
Steel | 3 mm |
0.5 mm | 3.33 kN |
Substrate
Steel
|
1.2 mm |
Steel | |
0.5 mm | 1.95 kN |
NR,II,K (Tensile - Pull-out) | 1.2mm Steel: 1.3 kN |
2mm Steel: 2.62 kN | |
3mm Steel: 4.76 kN |
Substrate
Steel
|
A15 Washer |
Steel | 3 mm |
0.5 mm | 3.33 kN |
Substrate
Steel
|
1.2 mm |
Steel | |
0.5 mm | 1.95 kN |
NR,II,K (Tensile - Pull-out) | 1.2mm Steel: 1.3 kN |
2mm Steel: 2.62 kN | |
3mm Steel: 4.76 kN |
Substrate
Steel
|
A15 Washer |
Steel | 3 mm |
0.5 mm | 3.33 kN |
Substrate
Steel
|
1.2 mm |
Steel | |
0.5 mm | 1.95 kN |
NR,II,K (Tensile - Pull-out) | 1.2mm Steel: 1.3 kN |
2mm Steel: 2.62 kN | |
3mm Steel: 4.76 kN |
Substrate
Steel
|
A15 Washer |
Steel | 3 mm |
0.5 mm | 3.33 kN |
Installation tool | Variable speed electric screwdriver |
Installation drive | Fixfast GreenDrive (8mm hex integral socket with retaining clip) |
Installation speed | 1500 RPM |
Correct installation | Fasteners should be driven within three degrees of perpendicular to the surface of the fastened material. Use a depth-setting nosepiece to avoid over-driving, and do not over-tighten. Variants with bonded washers should not have the rubber compressed to less than two-thirds of its uncompressed height. Care should be taken when engaging and disengaging from the fastener head to avoid damage to the protective coating. |
Handling | Fasteners may have sharp edges, and the use of power tools can be dangerous. Use personal protective equipment. Store fasteners in dry conditions. Inspect each fastener before use and do not use damaged fasteners. |