Checkout using your account
This form is protected by reCAPTCHA - the Google Privacy Policy and Terms of Service apply.
Checkout as a new customer
Creating an account has many benefits:
Carbon steel composite panel fastener for fixing to light section steel.
Supplied pre-assembled with a 29mm diameter sealing washer, normally used for fastening rooflights.
Estimated lead times
2-3 Days
Estimated lead times
2-3 Days
Estimated lead times
2-3 Days
Estimated lead times
2-3 Days
Estimated lead times
2-3 Days
Estimated lead times
2-3 Days
Estimated lead times
2-3 Days
Estimated lead times
2-3 Days
Estimated lead times
2-3 Days
Estimated lead times
2-3 Days
Estimated lead times
2-3 Days
Estimated lead times
2-3 Days
Estimated lead times
2-3 Days
Estimated lead times
2-3 Days
Estimated lead times
2-3 Days
Estimated lead times
2-3 Days
Carbon steel high thread fastener for fixing composite panels to light steel.
Years / Environment
|
||||||
---|---|---|---|---|---|---|
Interior | Rural | Urban | Industrial / Coastal | Marine | Swimming pools & Chemical plants | |
Corrosivity Category | C1 | C2 | C3 | C4 | C5 | - |
Carbon steel case hardened | 25 | 12 | 0 | 0 | 0 | 0 |
Years / Environment
|
||||||
---|---|---|---|---|---|---|
Interior | Rural | Urban | Industrial / Coastal | Marine | Swimming pools & Chemical plants | |
Corrosivity Category | C1 | C2 | C3 | C4 | C5 | - |
Carbon steel case hardened | 25 | 12 | 0 | 0 | 0 | 0 |
Years / Environment
|
||||||
---|---|---|---|---|---|---|
Interior | Rural | Urban | Industrial / Coastal | Marine | Swimming pools & Chemical plants | |
Corrosivity Category | C1 | C2 | C3 | C4 | C5 | - |
Carbon steel case hardened | 25 | 12 | 0 | 0 | 0 | 0 |
Years / Environment
|
||||||
---|---|---|---|---|---|---|
Interior | Rural | Urban | Industrial / Coastal | Marine | Swimming pools & Chemical plants | |
Corrosivity Category | C1 | C2 | C3 | C4 | C5 | - |
Carbon steel case hardened | 25 | 12 | 0 | 0 | 0 | 0 |
Years / Environment
|
||||||
---|---|---|---|---|---|---|
Interior | Rural | Urban | Industrial / Coastal | Marine | Swimming pools & Chemical plants | |
Corrosivity Category | C1 | C2 | C3 | C4 | C5 | - |
Carbon steel case hardened | 25 | 12 | 0 | 0 | 0 | 0 |
Years / Environment
|
||||||
---|---|---|---|---|---|---|
Interior | Rural | Urban | Industrial / Coastal | Marine | Swimming pools & Chemical plants | |
Corrosivity Category | C1 | C2 | C3 | C4 | C5 | - |
Carbon steel case hardened | 25 | 12 | 0 | 0 | 0 | 0 |
Years / Environment
|
||||||
---|---|---|---|---|---|---|
Interior | Rural | Urban | Industrial / Coastal | Marine | Swimming pools & Chemical plants | |
Corrosivity Category | C1 | C2 | C3 | C4 | C5 | - |
Carbon steel case hardened | 25 | 12 | 0 | 0 | 0 | 0 |
Years / Environment
|
||||||
---|---|---|---|---|---|---|
Interior | Rural | Urban | Industrial / Coastal | Marine | Swimming pools & Chemical plants | |
Corrosivity Category | C1 | C2 | C3 | C4 | C5 | - |
Carbon steel case hardened | 25 | 12 | 0 | 0 | 0 | 0 |
Years / Environment
|
||||||
---|---|---|---|---|---|---|
Interior | Rural | Urban | Industrial / Coastal | Marine | Swimming pools & Chemical plants | |
Corrosivity Category | C1 | C2 | C3 | C4 | C5 | - |
Carbon steel case hardened | 25 | 12 | 0 | 0 | 0 | 0 |
Substrate
Composite panel
|
1.2 mm |
Steel | |
100 mm | 0.92 kN |
NR,II,K (Tensile - Pull-out) | 1.2mm Steel: 0.4352 kN |
2mm Steel: 3.01 kN | |
3mm Steel: 5.42 kN |
Substrate
Steel
|
A29 Washer |
Composite panel | 3 mm |
100 mm | 3.28 kN |
Substrate
Composite panel
|
1.2 mm |
Steel | |
100 mm | 0.92 kN |
NR,II,K (Tensile - Pull-out) | 1.2mm Steel: 0.4352 kN |
2mm Steel: 3.01 kN | |
3mm Steel: 5.42 kN |
Substrate
Steel
|
A29 Washer |
Composite panel | 3 mm |
100 mm | 3.28 kN |
Substrate
Composite panel
|
1.2 mm |
Steel | |
100 mm | 0.92 kN |
NR,II,K (Tensile - Pull-out) | 1.2mm Steel: 0.4352 kN |
2mm Steel: 3.01 kN | |
3mm Steel: 5.42 kN |
Substrate
Steel
|
A29 Washer |
Composite panel | 3 mm |
100 mm | 3.28 kN |
Substrate
Composite panel
|
1.2 mm |
Steel | |
100 mm | 0.92 kN |
NR,II,K (Tensile - Pull-out) | 1.2mm Steel: 0.4352 kN |
2mm Steel: 3.01 kN | |
3mm Steel: 5.42 kN |
Substrate
Steel
|
A29 Washer |
Composite panel | 3 mm |
100 mm | 3.28 kN |
Substrate
Composite panel
|
1.2 mm |
Steel | |
100 mm | 0.92 kN |
NR,II,K (Tensile - Pull-out) | 1.2mm Steel: 0.4352 kN |
2mm Steel: 3.01 kN | |
3mm Steel: 5.42 kN |
Substrate
Steel
|
A29 Washer |
Composite panel | 3 mm |
100 mm | 3.28 kN |
Substrate
Composite panel
|
1.2 mm |
Steel | |
100 mm | 0.92 kN |
NR,II,K (Tensile - Pull-out) | 1.2mm Steel: 0.4352 kN |
2mm Steel: 3.01 kN | |
3mm Steel: 5.42 kN |
Substrate
Steel
|
A29 Washer |
Composite panel | 3 mm |
100 mm | 3.28 kN |
Substrate
Composite panel
|
1.2 mm |
Steel | |
100 mm | 0.92 kN |
NR,II,K (Tensile - Pull-out) | 1.2mm Steel: 0.4352 kN |
2mm Steel: 3.01 kN | |
3mm Steel: 5.42 kN |
Substrate
Steel
|
A29 Washer |
Composite panel | 3 mm |
100 mm | 3.28 kN |
Substrate
Composite panel
|
1.2 mm |
Steel | |
100 mm | 0.92 kN |
NR,II,K (Tensile - Pull-out) | 1.2mm Steel: 0.4352 kN |
2mm Steel: 3.01 kN | |
3mm Steel: 5.42 kN |
Substrate
Steel
|
A29 Washer |
Composite panel | 3 mm |
100 mm | 3.28 kN |
Substrate
Composite panel
|
1.2 mm |
Steel | |
100 mm | 0.92 kN |
NR,II,K (Tensile - Pull-out) | 1.2mm Steel: 0.4352 kN |
2mm Steel: 3.01 kN | |
3mm Steel: 5.42 kN |
Substrate
Steel
|
A29 Washer |
Composite panel | 3 mm |
100 mm | 3.28 kN |
Installation tool | Variable speed electric screw gun |
Installation drive | Fixfast YellowDrive socket |
Installation speed | 1500 RPM |
Correct installation | Fasteners should be driven within three degrees of perpendicular to the surface of the fastened material. Use a depth-setting nosepiece to avoid over-driving, and do not over-tighten. Variants with bonded washers should not have the rubber compressed to less than two-thirds of its uncompressed height. Care should be taken when engaging and disengaging from the fastener head to avoid damage to the protective coating. |
Handling | Fasteners may have sharp edges, and the use of power tools can be dangerous. Use personal protective equipment. Store fasteners in dry conditions. Inspect each fastener before use and do not use damaged fasteners. |
Carbon steel high thread fastener for fixing composite panels to light steel.
Years / Environment
|
||||||
---|---|---|---|---|---|---|
Interior | Rural | Urban | Industrial / Coastal | Marine | Swimming pools & Chemical plants | |
Corrosivity Category | C1 | C2 | C3 | C4 | C5 | - |
Carbon steel case hardened | 25 | 12 | 0 | 0 | 0 | 0 |
Years / Environment
|
||||||
---|---|---|---|---|---|---|
Interior | Rural | Urban | Industrial / Coastal | Marine | Swimming pools & Chemical plants | |
Corrosivity Category | C1 | C2 | C3 | C4 | C5 | - |
Carbon steel case hardened | 25 | 12 | 0 | 0 | 0 | 0 |
Years / Environment
|
||||||
---|---|---|---|---|---|---|
Interior | Rural | Urban | Industrial / Coastal | Marine | Swimming pools & Chemical plants | |
Corrosivity Category | C1 | C2 | C3 | C4 | C5 | - |
Carbon steel case hardened | 25 | 12 | 0 | 0 | 0 | 0 |
Years / Environment
|
||||||
---|---|---|---|---|---|---|
Interior | Rural | Urban | Industrial / Coastal | Marine | Swimming pools & Chemical plants | |
Corrosivity Category | C1 | C2 | C3 | C4 | C5 | - |
Carbon steel case hardened | 25 | 12 | 0 | 0 | 0 | 0 |
Years / Environment
|
||||||
---|---|---|---|---|---|---|
Interior | Rural | Urban | Industrial / Coastal | Marine | Swimming pools & Chemical plants | |
Corrosivity Category | C1 | C2 | C3 | C4 | C5 | - |
Carbon steel case hardened | 25 | 12 | 0 | 0 | 0 | 0 |
Years / Environment
|
||||||
---|---|---|---|---|---|---|
Interior | Rural | Urban | Industrial / Coastal | Marine | Swimming pools & Chemical plants | |
Corrosivity Category | C1 | C2 | C3 | C4 | C5 | - |
Carbon steel case hardened | 25 | 12 | 0 | 0 | 0 | 0 |
Years / Environment
|
||||||
---|---|---|---|---|---|---|
Interior | Rural | Urban | Industrial / Coastal | Marine | Swimming pools & Chemical plants | |
Corrosivity Category | C1 | C2 | C3 | C4 | C5 | - |
Carbon steel case hardened | 25 | 12 | 0 | 0 | 0 | 0 |
Years / Environment
|
||||||
---|---|---|---|---|---|---|
Interior | Rural | Urban | Industrial / Coastal | Marine | Swimming pools & Chemical plants | |
Corrosivity Category | C1 | C2 | C3 | C4 | C5 | - |
Carbon steel case hardened | 25 | 12 | 0 | 0 | 0 | 0 |
Years / Environment
|
||||||
---|---|---|---|---|---|---|
Interior | Rural | Urban | Industrial / Coastal | Marine | Swimming pools & Chemical plants | |
Corrosivity Category | C1 | C2 | C3 | C4 | C5 | - |
Carbon steel case hardened | 25 | 12 | 0 | 0 | 0 | 0 |
Substrate
Composite panel
|
1.2 mm |
Steel | |
100 mm | 0.92 kN |
NR,II,K (Tensile - Pull-out) | 1.2mm Steel: 0.4352 kN |
2mm Steel: 3.01 kN | |
3mm Steel: 5.42 kN |
Substrate
Steel
|
A29 Washer |
Composite panel | 3 mm |
100 mm | 3.28 kN |
Substrate
Composite panel
|
1.2 mm |
Steel | |
100 mm | 0.92 kN |
NR,II,K (Tensile - Pull-out) | 1.2mm Steel: 0.4352 kN |
2mm Steel: 3.01 kN | |
3mm Steel: 5.42 kN |
Substrate
Steel
|
A29 Washer |
Composite panel | 3 mm |
100 mm | 3.28 kN |
Substrate
Composite panel
|
1.2 mm |
Steel | |
100 mm | 0.92 kN |
NR,II,K (Tensile - Pull-out) | 1.2mm Steel: 0.4352 kN |
2mm Steel: 3.01 kN | |
3mm Steel: 5.42 kN |
Substrate
Steel
|
A29 Washer |
Composite panel | 3 mm |
100 mm | 3.28 kN |
Substrate
Composite panel
|
1.2 mm |
Steel | |
100 mm | 0.92 kN |
NR,II,K (Tensile - Pull-out) | 1.2mm Steel: 0.4352 kN |
2mm Steel: 3.01 kN | |
3mm Steel: 5.42 kN |
Substrate
Steel
|
A29 Washer |
Composite panel | 3 mm |
100 mm | 3.28 kN |
Substrate
Composite panel
|
1.2 mm |
Steel | |
100 mm | 0.92 kN |
NR,II,K (Tensile - Pull-out) | 1.2mm Steel: 0.4352 kN |
2mm Steel: 3.01 kN | |
3mm Steel: 5.42 kN |
Substrate
Steel
|
A29 Washer |
Composite panel | 3 mm |
100 mm | 3.28 kN |
Substrate
Composite panel
|
1.2 mm |
Steel | |
100 mm | 0.92 kN |
NR,II,K (Tensile - Pull-out) | 1.2mm Steel: 0.4352 kN |
2mm Steel: 3.01 kN | |
3mm Steel: 5.42 kN |
Substrate
Steel
|
A29 Washer |
Composite panel | 3 mm |
100 mm | 3.28 kN |
Substrate
Composite panel
|
1.2 mm |
Steel | |
100 mm | 0.92 kN |
NR,II,K (Tensile - Pull-out) | 1.2mm Steel: 0.4352 kN |
2mm Steel: 3.01 kN | |
3mm Steel: 5.42 kN |
Substrate
Steel
|
A29 Washer |
Composite panel | 3 mm |
100 mm | 3.28 kN |
Substrate
Composite panel
|
1.2 mm |
Steel | |
100 mm | 0.92 kN |
NR,II,K (Tensile - Pull-out) | 1.2mm Steel: 0.4352 kN |
2mm Steel: 3.01 kN | |
3mm Steel: 5.42 kN |
Substrate
Steel
|
A29 Washer |
Composite panel | 3 mm |
100 mm | 3.28 kN |
Substrate
Composite panel
|
1.2 mm |
Steel | |
100 mm | 0.92 kN |
NR,II,K (Tensile - Pull-out) | 1.2mm Steel: 0.4352 kN |
2mm Steel: 3.01 kN | |
3mm Steel: 5.42 kN |
Substrate
Steel
|
A29 Washer |
Composite panel | 3 mm |
100 mm | 3.28 kN |
Installation tool | Variable speed electric screw gun |
Installation drive | Fixfast YellowDrive socket |
Installation speed | 1500 RPM |
Correct installation | Fasteners should be driven within three degrees of perpendicular to the surface of the fastened material. Use a depth-setting nosepiece to avoid over-driving, and do not over-tighten. Variants with bonded washers should not have the rubber compressed to less than two-thirds of its uncompressed height. Care should be taken when engaging and disengaging from the fastener head to avoid damage to the protective coating. |
Handling | Fasteners may have sharp edges, and the use of power tools can be dangerous. Use personal protective equipment. Store fasteners in dry conditions. Inspect each fastener before use and do not use damaged fasteners. |