A2/304 grade stainless steel composite panel fastener for fixing to heavy section steel
Supplied pre-assembled with a 29mm diameter sealing washer, normally used for fastening rooflights.
Estimated lead times
2-3 Days
Estimated lead times
2-3 Days
Estimated lead times
2-3 Days
Estimated lead times
2-3 Days
Estimated lead times
2-3 Days
Estimated lead times
2-3 Days
Estimated lead times
2-3 Days
Estimated lead times
2-3 Days
Estimated lead times
2-3 Days
Estimated lead times
2-3 Days
Estimated lead times
2-3 Days
Estimated lead times
2-3 Days
Stainless steel high thread fastener for fixing composite panel systems to heavy steel.
Features
- High thread provides optimal clamping force to top sheet
- Genuine A2 grade stainless steel for optimum corrosion resistance
- Consistently high pull-out and shear values
- Purpose designed for easy and effective installation
- Specialist GreenDrive installation tool
- Supplied pre-assembled with an Aluminium / EPDM rubber 29mm diameter sealing washer, normally used for fastening rooflights. Hexagon head rooflight fasteners should always be capped with a red hex colour cap.
- For mechanically fixing composite panel systems to heavy steel purlins and sections
Years / Environment
|
|||||||
---|---|---|---|---|---|---|---|
Interior | Semi-interior | Rural | Urban | Industrial / Coastal | Marine | Swimming pools & Chemical plants | |
Corrosivity Category | C1 | - | C2 | C3 | C4 | C5 | - |
Austenitic Stainless Steel A2 Grade (304) | 30 | 25 | 25 | 25 | 15 | 0 | 0 |
Years / Environment
|
|||||||
---|---|---|---|---|---|---|---|
Interior | Semi-interior | Rural | Urban | Industrial / Coastal | Marine | Swimming pools & Chemical plants | |
Corrosivity Category | C1 | - | C2 | C3 | C4 | C5 | - |
Austenitic Stainless Steel A2 Grade (304) | 30 | 25 | 25 | 25 | 15 | 0 | 0 |
Years / Environment
|
|||||||
---|---|---|---|---|---|---|---|
Interior | Semi-interior | Rural | Urban | Industrial / Coastal | Marine | Swimming pools & Chemical plants | |
Corrosivity Category | C1 | - | C2 | C3 | C4 | C5 | - |
Austenitic Stainless Steel A2 Grade (304) | 30 | 25 | 25 | 25 | 15 | 0 | 0 |
Years / Environment
|
|||||||
---|---|---|---|---|---|---|---|
Interior | Semi-interior | Rural | Urban | Industrial / Coastal | Marine | Swimming pools & Chemical plants | |
Corrosivity Category | C1 | - | C2 | C3 | C4 | C5 | - |
Austenitic Stainless Steel A2 Grade (304) | 30 | 25 | 25 | 25 | 15 | 0 | 0 |
Years / Environment
|
|||||||
---|---|---|---|---|---|---|---|
Interior | Semi-interior | Rural | Urban | Industrial / Coastal | Marine | Swimming pools & Chemical plants | |
Corrosivity Category | C1 | - | C2 | C3 | C4 | C5 | - |
Austenitic Stainless Steel A2 Grade (304) | 30 | 25 | 25 | 25 | 15 | 0 | 0 |
Years / Environment
|
|||||||
---|---|---|---|---|---|---|---|
Interior | Semi-interior | Rural | Urban | Industrial / Coastal | Marine | Swimming pools & Chemical plants | |
Corrosivity Category | C1 | - | C2 | C3 | C4 | C5 | - |
Austenitic Stainless Steel A2 Grade (304) | 30 | 25 | 25 | 25 | 15 | 0 | 0 |
Years / Environment
|
|||||||
---|---|---|---|---|---|---|---|
Interior | Semi-interior | Rural | Urban | Industrial / Coastal | Marine | Swimming pools & Chemical plants | |
Corrosivity Category | C1 | - | C2 | C3 | C4 | C5 | - |
Austenitic Stainless Steel A2 Grade (304) | 30 | 25 | 25 | 25 | 15 | 0 | 0 |
Substrate
Composite panel
|
4 mm |
Steel | |
0.5 mm | 1.04 kN |
NR,II,K (Tensile - Pull-out) | 4mm Steel: 2.80 kN |
6mm Steel: 3.09 kN | |
8mm Steel: 6.89 kN |
Substrate
Steel
|
A29 Washer |
Composite panel | 4 mm |
0.5 mm | 3.28 kN |
Substrate
Composite panel
|
4 mm |
Steel | |
0.5 mm | 1.04 kN |
NR,II,K (Tensile - Pull-out) | 4mm Steel: 2.80 kN |
6mm Steel: 3.09 kN | |
8mm Steel: 6.89 kN |
Substrate
Steel
|
A29 Washer |
Composite panel | 4 mm |
0.5 mm | 3.28 kN |
Substrate
Composite panel
|
4 mm |
Steel | |
0.5 mm | 1.04 kN |
NR,II,K (Tensile - Pull-out) | 4mm Steel: 2.80 kN |
6mm Steel: 3.09 kN | |
8mm Steel: 6.89 kN |
Substrate
Steel
|
A29 Washer |
Composite panel | 4 mm |
0.5 mm | 3.28 kN |
Substrate
Composite panel
|
4 mm |
Steel | |
0.5 mm | 1.04 kN |
NR,II,K (Tensile - Pull-out) | 4mm Steel: 2.80 kN |
6mm Steel: 3.09 kN | |
8mm Steel: 6.89 kN |
Substrate
Steel
|
A29 Washer |
Composite panel | 4 mm |
0.5 mm | 3.28 kN |
Substrate
Composite panel
|
4 mm |
Steel | |
0.5 mm | 1.04 kN |
NR,II,K (Tensile - Pull-out) | 4mm Steel: 2.80 kN |
6mm Steel: 3.09 kN | |
8mm Steel: 6.89 kN |
Substrate
Steel
|
A29 Washer |
Composite panel | 4 mm |
0.5 mm | 3.28 kN |
Substrate
Composite panel
|
4 mm |
Steel | |
0.5 mm | 1.04 kN |
NR,II,K (Tensile - Pull-out) | 4mm Steel: 2.80 kN |
6mm Steel: 3.09 kN | |
8mm Steel: 6.89 kN |
Substrate
Steel
|
A29 Washer |
Composite panel | 4 mm |
0.5 mm | 3.28 kN |
Substrate
Composite panel
|
4 mm |
Steel | |
0.5 mm | 1.04 kN |
NR,II,K (Tensile - Pull-out) | 4mm Steel: 2.80 kN |
6mm Steel: 3.09 kN | |
8mm Steel: 6.89 kN |
Substrate
Steel
|
A29 Washer |
Composite panel | 4 mm |
0.5 mm | 3.28 kN |
Installation tool | Variable speed electric screwdriver |
Installation drive | Fixfast GreenDrive (8mm hex integral socket with retaining clip) |
Installation speed | 1500 RPM |
Correct installation | Fasteners should be driven within three degrees of perpendicular to the surface of the fastened material. Use a depth-setting nosepiece to avoid over-driving, and do not over-tighten. Variants with bonded washers should not have the rubber compressed to less than two-thirds of its uncompressed height. Care should be taken when engaging and disengaging from the fastener head to avoid damage to the protective coating. |
Handling | Fasteners may have sharp edges, and the use of power tools can be dangerous. Use personal protective equipment. Store fasteners in dry conditions. Inspect each fastener before use and do not use damaged fasteners. |
Stainless steel high thread fastener for fixing composite panel systems to heavy steel.
Features
- High thread provides optimal clamping force to top sheet
- Genuine A2 grade stainless steel for optimum corrosion resistance
- Consistently high pull-out and shear values
- Purpose designed for easy and effective installation
- Specialist GreenDrive installation tool
- Supplied pre-assembled with an Aluminium / EPDM rubber 29mm diameter sealing washer, normally used for fastening rooflights. Hexagon head rooflight fasteners should always be capped with a red hex colour cap.
- For mechanically fixing composite panel systems to heavy steel purlins and sections
Years / Environment
|
|||||||
---|---|---|---|---|---|---|---|
Interior | Semi-interior | Rural | Urban | Industrial / Coastal | Marine | Swimming pools & Chemical plants | |
Corrosivity Category | C1 | - | C2 | C3 | C4 | C5 | - |
Austenitic Stainless Steel A2 Grade (304) | 30 | 25 | 25 | 25 | 15 | 0 | 0 |
Years / Environment
|
|||||||
---|---|---|---|---|---|---|---|
Interior | Semi-interior | Rural | Urban | Industrial / Coastal | Marine | Swimming pools & Chemical plants | |
Corrosivity Category | C1 | - | C2 | C3 | C4 | C5 | - |
Austenitic Stainless Steel A2 Grade (304) | 30 | 25 | 25 | 25 | 15 | 0 | 0 |
Years / Environment
|
|||||||
---|---|---|---|---|---|---|---|
Interior | Semi-interior | Rural | Urban | Industrial / Coastal | Marine | Swimming pools & Chemical plants | |
Corrosivity Category | C1 | - | C2 | C3 | C4 | C5 | - |
Austenitic Stainless Steel A2 Grade (304) | 30 | 25 | 25 | 25 | 15 | 0 | 0 |
Years / Environment
|
|||||||
---|---|---|---|---|---|---|---|
Interior | Semi-interior | Rural | Urban | Industrial / Coastal | Marine | Swimming pools & Chemical plants | |
Corrosivity Category | C1 | - | C2 | C3 | C4 | C5 | - |
Austenitic Stainless Steel A2 Grade (304) | 30 | 25 | 25 | 25 | 15 | 0 | 0 |
Years / Environment
|
|||||||
---|---|---|---|---|---|---|---|
Interior | Semi-interior | Rural | Urban | Industrial / Coastal | Marine | Swimming pools & Chemical plants | |
Corrosivity Category | C1 | - | C2 | C3 | C4 | C5 | - |
Austenitic Stainless Steel A2 Grade (304) | 30 | 25 | 25 | 25 | 15 | 0 | 0 |
Years / Environment
|
|||||||
---|---|---|---|---|---|---|---|
Interior | Semi-interior | Rural | Urban | Industrial / Coastal | Marine | Swimming pools & Chemical plants | |
Corrosivity Category | C1 | - | C2 | C3 | C4 | C5 | - |
Austenitic Stainless Steel A2 Grade (304) | 30 | 25 | 25 | 25 | 15 | 0 | 0 |
Years / Environment
|
|||||||
---|---|---|---|---|---|---|---|
Interior | Semi-interior | Rural | Urban | Industrial / Coastal | Marine | Swimming pools & Chemical plants | |
Corrosivity Category | C1 | - | C2 | C3 | C4 | C5 | - |
Austenitic Stainless Steel A2 Grade (304) | 30 | 25 | 25 | 25 | 15 | 0 | 0 |
Substrate
Composite panel
|
4 mm |
Steel | |
0.5 mm | 1.04 kN |
NR,II,K (Tensile - Pull-out) | 4mm Steel: 2.80 kN |
6mm Steel: 3.09 kN |