DrillFast® 130mm carbon steel heavy section fibre cement fastener
Carbon steel fibre cement fixing to heavy section steel
Estimated lead times
1 Day
Estimated lead times
1 Day
Product Code
DF12-FCW-6.3 x 130
Lead Time
1 Day
Your price
Qty
£0.38
(ex.VAT)
(ex.VAT)
Create New Favourites List
Key Features
Specification
Capacity
Performance
Installation
Downloads
Description
Carbon steel fastener for fixing fibre cement sheeting to heavy steel.
Features & Benefits
- Drills a clearance hole in sheeting to allow for movement
- Supplied with an FCW washer to provide a weatherseal suitable for fibre-cement sheeting.
- Multi-layer Organic coating provides corrosion protection within stated durability guidelines.
Application
- For mechanically fixing fibre cement sheeting to heavy steel purlins and sections
Fastener Material
Fastener
Carbon steel case hardened with multiple layer organic coating
Sealing Washer
FCW Washer
Durability Class
|
Years / Environment
|
||||||
|---|---|---|---|---|---|---|
| Interior | Rural | Urban | Industrial / Coastal | Marine | Swimming pools & Chemical plants | |
| Corrosivity Category | C1 | C2 | C3 | C4 | C5 | - |
| Carbon steel case hardened | 25 | 12 | 0 | 0 | 0 | 0 |
Dimensions
Diameter
6.3 mm
Length (mm)
130 mm
Effective Thread Length (Min)
44 mm
Effective Thread Length (Max)
97 mm
Head Style
Hexagon 8mm
Drilling Capacity
Steel
4 mm
12 mm
Build-up
Effective thread length
Fastener pull-out performance
| NR,II,K (Tensile - Pull-out) | 4mm Steel: 1.52 kN |
| 6mm Steel: 3.01 kN | |
| 8mm Steel: 5.42 kN | |
| 12mm Steel: 5.42 kN |
Installation and handling
| Installation tool | Variable speed electric screw gun |
| Installation drive | Fixfast YellowDrive socket |
| Installation speed | 1500 RPM |
| Correct installation | Fasteners should be driven within three degrees of perpendicular to the surface of the fastened material. Use a depth-setting nosepiece to avoid over-driving, and do not over-tighten. Variants with bonded washers should not have the rubber compressed to less than two-thirds of its uncompressed height. Care should be taken when engaging and disengaging from the fastener head to avoid damage to the protective coating. |
| Handling | Fasteners may have sharp edges, and the use of power tools can be dangerous. Use personal protective equipment. Store fasteners in dry conditions. Inspect each fastener before use and do not use damaged fasteners. |
Key Features
Description
Carbon steel fastener for fixing fibre cement sheeting to heavy steel.
Features & Benefits
- Drills a clearance hole in sheeting to allow for movement
- Supplied with an FCW washer to provide a weatherseal suitable for fibre-cement sheeting.
- Multi-layer Organic coating provides corrosion protection within stated durability guidelines.
Application
- For mechanically fixing fibre cement sheeting to heavy steel purlins and sections
Specification
Fastener Material
Fastener
Carbon steel case hardened with multiple layer organic coating
Sealing Washer
FCW Washer
Durability Class
|
Years / Environment
|
||||||
|---|---|---|---|---|---|---|
| Interior | Rural | Urban | Industrial / Coastal | Marine | Swimming pools & Chemical plants | |
| Corrosivity Category | C1 | C2 | C3 | C4 | C5 | - |
| Carbon steel case hardened | 25 | 12 | 0 | 0 | 0 | 0 |
Dimensions
Diameter
6.3 mm
Length (mm)
130 mm
Effective Thread Length (Min)
44 mm
Effective Thread Length (Max)
97 mm
Head Style
Hexagon 8mm
Drilling Capacity
Steel
4 mm
12 mm
Capacity
Build-up
Effective thread length
Performance
Fastener pull-out performance
| NR,II,K (Tensile - Pull-out) | 4mm Steel: 1.52 kN |
| 6mm Steel: 3.01 kN | |
| 8mm Steel: 5.42 kN | |
| 12mm Steel: 5.42 kN |
Installation
Installation and handling
| Installation tool | Variable speed electric screw gun |
| Installation drive | Fixfast YellowDrive socket |
| Installation speed | 1500 RPM |
| Correct installation | Fasteners should be driven within three degrees of perpendicular to the surface of the fastened material. Use a depth-setting nosepiece to avoid over-driving, and do not over-tighten. Variants with bonded washers should not have the rubber compressed to less than two-thirds of its uncompressed height. Care should be taken when engaging and disengaging from the fastener head to avoid damage to the protective coating. |
| Handling | Fasteners may have sharp edges, and the use of power tools can be dangerous. Use personal protective equipment. Store fasteners in dry conditions. Inspect each fastener before use and do not use damaged fasteners. |
Downloads
