DrillFast® carbon steel heavy section fastener, 15mm washer

Carbon steel fastener for fixing to heavy section steel.

Supplied pre-assembled with an Aluminium / EPDM rubber 15mm diameter sealing washer, normally used in wall applications.

Certified by

Certified by

DrillFast® carbon steel heavy section fastener, 15mm washer

Carbon steel fastener for fixing to heavy section steel.

Supplied pre-assembled with an Aluminium / EPDM rubber 15mm diameter sealing washer, normally used in wall applications.

Product Code

Lengths*

Size guide

Your price

Per 100

Qty

Create New Favourites List

Related Products

Add to favourites

Create New Favourites List

Product code

Your price

Per 1

Add to favourites

Create New Favourites List

	Years / Environment
	Interior	Semi-interior	Rural	Urban	Industrial / Coastal	Marine	Swimming pools & Chemical plants
Corrosivity Category	C1	-	C2	C3	C4	C5	-
Carbon steel case hardened	25	20	12	0	0	0	0

	Years / Environment
	Interior	Semi-interior	Rural	Urban	Industrial / Coastal	Marine	Swimming pools & Chemical plants
Corrosivity Category	C1	-	C2	C3	C4	C5	-
Carbon steel case hardened	25	20	12	0	0	0	0

	Years / Environment
	Interior	Semi-interior	Rural	Urban	Industrial / Coastal	Marine	Swimming pools & Chemical plants
Corrosivity Category	C1	-	C2	C3	C4	C5	-
Carbon steel case hardened	25	20	12	0	0	0	0

	Years / Environment
	Interior	Semi-interior	Rural	Urban	Industrial / Coastal	Marine	Swimming pools & Chemical plants
Corrosivity Category	C1	-	C2	C3	C4	C5	-
Carbon steel case hardened	25	20	12	0	0	0	0

	Years / Environment
	Interior	Semi-interior	Rural	Urban	Industrial / Coastal	Marine	Swimming pools & Chemical plants
Corrosivity Category	C1	-	C2	C3	C4	C5	-
Carbon steel case hardened	25	20	12	0	0	0	0

Fastener SKU	Washer	Min	Max
DF12-A15-5.5 x 38	A15 Washer	0 mm	11 mm
DF12-A15-5.5 x 60	A15 Washer	0 mm	33 mm
DF12-A15-5.5 x 80	A15 Washer	12 mm	53 mm
DF12-A15-5.5 x 100	A15 Washer	32 mm	73 mm

Installation tool	Variable speed electric screwdriver
Installation drive	Fixfast YellowDrive socket
Installation speed	1500 RPM
Correct installation	Fasteners should be driven within three degrees of perpendicular to the surface of the fastened material. Use a depth-setting nosepiece to avoid over-driving, and do not over-tighten. Variants with bonded washers should not have the rubber compressed to less than two-thirds of its uncompressed height. Care should be taken when engaging and disengaging from the fastener head to avoid damage to the protective coating.
Handling	Fasteners may have sharp edges, and the use of power tools can be dangerous. Use personal protective equipment. Store fasteners in dry conditions. Inspect each fastener before use and do not use damaged fasteners.