Carbon steel through-bolt expansion anchor for use in cracked and non cracked concrete
Index zinc plated carbon steel anchor, with male thread, expansion by controlled torque
Estimated lead times
1 Day
Estimated lead times
2 Weeks
Estimated lead times
1 Day
Estimated lead times
1 Day
Estimated lead times
2 Weeks
Estimated lead times
1 Day
Product Code
APX-10
Lead Time
1 Day
Lead Time
2 Weeks
Lead Time
1 Day
Your price
Qty
£0.62
(ex.VAT)
As low as:
(ex.VAT)
APX-10 x 90
APX-10 x 185
APX-10 x 115
Create New Favourites List
Key Features
Downloads
Description
Male thread anchor, torque controlled expansion. For high loads in cracked and non-cracked concrete. Approved by ETE Opt.1 for structural fixings on concrete. Shaft made of zinc-plated steel and clip made of steel with ATLANTIS C3-L coating.
APPLICATIONS
- Anchor plates
- Metallic structures
- Bridges
- Urban fitments
- Protective fences
- Elevators
- Pipe supports
BASE MATERIAL
- Cracked or non-cracked concrete class from C20/25 to C50/60
Features & Benefits
- Easy installation
- Use in cracked and non-cracked concrete
- Use for medium-heavy duty loads
- Pre-installation, or through the drill-hole of the fixture
- Variety of lengths and diameters: flexibility in assembly
- For static and quasi-static loads
- Length mark on top of the shaft for identification post-install
- Blue line on thread to mark embedment depth
- Unthreaded section for hammer in protection of thread
The details
Product Code
APX-10 x 90
Length
90 mm
Diameter
10 mm
Build Up (Max)
10 mm
Pre-Drill Diameter
10 mm
Min Drill Depth
75 mm
Minimum Embedment Depth
68 mm
Installation Torque
40 Nm
Hex Nut Width
17 mm
Product Code
APX-10 x 185
Length
185 mm
Diameter
10 mm
Build Up (Max)
105 mm
Pre-Drill Diameter
10 mm
Min Drill Depth
75 mm
Minimum Embedment Depth
68 mm
Installation Torque
40 Nm
Hex Nut Width
17 mm
Product Code
APX-10 x 115
Length
115 mm
Diameter
10 mm
Build Up (Max)
35 mm
Pre-Drill Diameter
10 mm
Min Drill Depth
75 mm
Minimum Embedment Depth
68 mm
Installation Torque
40 Nm
Hex Nut Width
17 mm
Diameter
10 mm
Pre-Drill Diameter
10 mm
Installation Torque
40 Nm
Hex Nut Width
17 mm
Downloads
Please see the below files available to download for this product
Key Features
Description
Male thread anchor, torque controlled expansion. For high loads in cracked and non-cracked concrete. Approved by ETE Opt.1 for structural fixings on concrete. Shaft made of zinc-plated steel and clip made of steel with ATLANTIS C3-L coating.
APPLICATIONS
- Anchor plates
- Metallic structures
- Bridges
- Urban fitments
- Protective fences
- Elevators
- Pipe supports
BASE MATERIAL
- Cracked or non-cracked concrete class from C20/25 to C50/60
Features & Benefits
- Easy installation
- Use in cracked and non-cracked concrete
- Use for medium-heavy duty loads
- Pre-installation, or through the drill-hole of the fixture
- Variety of lengths and diameters: flexibility in assembly
- For static and quasi-static loads
- Length mark on top of the shaft for identification post-install
- Blue line on thread to mark embedment depth
- Unthreaded section for hammer in protection of thread
The details
Product Code
APX-10 x 90
Length
90 mm
Diameter
10 mm
Build Up (Max)
10 mm
Pre-Drill Diameter
10 mm
Min Drill Depth
75 mm
Minimum Embedment Depth
68 mm
Installation Torque
40 Nm
Hex Nut Width
17 mm
Product Code
APX-10 x 185
Length
185 mm
Diameter
10 mm
Build Up (Max)
105 mm
Pre-Drill Diameter
10 mm
Min Drill Depth
75 mm
Minimum Embedment Depth
68 mm
Installation Torque
40 Nm
Hex Nut Width
17 mm
Product Code
APX-10 x 115
Length
115 mm
Diameter
10 mm
Build Up (Max)
35 mm
Pre-Drill Diameter
10 mm
Min Drill Depth
75 mm
Minimum Embedment Depth
68 mm
Installation Torque
40 Nm
Hex Nut Width
17 mm
Diameter
10 mm
Pre-Drill Diameter
10 mm
Installation Torque
40 Nm
Hex Nut Width
17 mm
Downloads
Downloads
Please see the below files available to download for this product
Related Products
Related Products
Related Products