DrillFast® 125mm stainless fibre cement sheeting fastener
A2/304 stainless steel mainfix for fixing fibre cement sheeting to light section steel
Estimated lead times
1 Day
Estimated lead times
1 Day
Product Code
DF3-SS-FCW-6.3 x 125
Lead Time
1 Day
Your price
Qty
£0.97
(ex.VAT)
(ex.VAT)
Create New Favourites List
Key Features
Specification
Capacity
Performance
Installation
Downloads
Description
Stainless steel fasteners for fixing fibre cement sheeting to light steel.
Features & Benefits
- Genuine A2 stainless steel for durability
- Purpose designed for easy and effective installation
- Drills a clearance hole in sheeting to allow for movement
- Complete with FCW washer for excellent weather sealing
- Consistently high pull-out and shear values
Application
- For mechanically fixing fibre cement sheeting to light metal purlins and rails
Fastener Material
Fastener
Austenitic Stainless Steel A2 Grade (304) with organic coating
Sealing Washer
FCW Washer
Durability Class
|
Years / Environment
|
|||||||
|---|---|---|---|---|---|---|---|
| Interior | Semi-interior | Rural | Urban | Industrial / Coastal | Marine | Swimming pools & Chemical plants | |
| Corrosivity Category | C1 | - | C2 | C3 | C4 | C5 | - |
| Austenitic Stainless Steel A2 Grade (304) | 30 | 25 | 25 | 25 | 15 | 0 | 0 |
Dimensions
Diameter
6.3 mm
Length (mm)
125 mm
Effective Thread Length (Min)
49 mm
Effective Thread Length (Max)
95 mm
Head Style
Hexagon 8mm
Drilling Capacity
Steel
1.2 mm
3 mm
Build-up
Effective thread length
Fastener pull-out performance
| NR,II,K (Tensile - Pull-out) | 1.2mm Steel: 1.84 kN |
| 2mm Steel: 3.08 kN | |
| 3mm Steel: 5.64 kN |
Installation and handling
| Installation tool | Variable speed electric screw gun |
| Installation drive | Fixfast GreenDrive (8mm hex integral socket with retaining clip) |
| Installation speed | 1500 RPM |
| Correct installation | Fasteners should be driven within three degrees of perpendicular to the surface of the fastened material. Use a depth-setting nosepiece to avoid over-driving, and do not over-tighten. Variants with bonded washers should not have the rubber compressed to less than two-thirds of its uncompressed height. Care should be taken when engaging and disengaging from the fastener head to avoid damage to the protective coating. |
| Handling | Fasteners may have sharp edges, and the use of power tools can be dangerous. Use personal protective equipment. Store fasteners in dry conditions. Inspect each fastener before use and do not use damaged fasteners. |
Key Features
Description
Stainless steel fasteners for fixing fibre cement sheeting to light steel.
Features & Benefits
- Genuine A2 stainless steel for durability
- Purpose designed for easy and effective installation
- Drills a clearance hole in sheeting to allow for movement
- Complete with FCW washer for excellent weather sealing
- Consistently high pull-out and shear values
Application
- For mechanically fixing fibre cement sheeting to light metal purlins and rails
Specification
Fastener Material
Fastener
Austenitic Stainless Steel A2 Grade (304) with organic coating
Sealing Washer
FCW Washer
Durability Class
|
Years / Environment
|
|||||||
|---|---|---|---|---|---|---|---|
| Interior | Semi-interior | Rural | Urban | Industrial / Coastal | Marine | Swimming pools & Chemical plants | |
| Corrosivity Category | C1 | - | C2 | C3 | C4 | C5 | - |
| Austenitic Stainless Steel A2 Grade (304) | 30 | 25 | 25 | 25 | 15 | 0 | 0 |
Dimensions
Diameter
6.3 mm
Length (mm)
125 mm
Effective Thread Length (Min)
49 mm
Effective Thread Length (Max)
95 mm
Head Style
Hexagon 8mm
Drilling Capacity
Steel
1.2 mm
3 mm
Capacity
Build-up
Effective thread length
Performance
Fastener pull-out performance
| NR,II,K (Tensile - Pull-out) | 1.2mm Steel: 1.84 kN |
| 2mm Steel: 3.08 kN | |
| 3mm Steel: 5.64 kN |
Installation
Installation and handling
| Installation tool | Variable speed electric screw gun |
| Installation drive | Fixfast GreenDrive (8mm hex integral socket with retaining clip) |
| Installation speed | 1500 RPM |
| Correct installation | Fasteners should be driven within three degrees of perpendicular to the surface of the fastened material. Use a depth-setting nosepiece to avoid over-driving, and do not over-tighten. Variants with bonded washers should not have the rubber compressed to less than two-thirds of its uncompressed height. Care should be taken when engaging and disengaging from the fastener head to avoid damage to the protective coating. |
| Handling | Fasteners may have sharp edges, and the use of power tools can be dangerous. Use personal protective equipment. Store fasteners in dry conditions. Inspect each fastener before use and do not use damaged fasteners. |
Downloads