DrillFast® carbon steel low profile dual purpose fastener 15mm washer

Carbon steel dual purpose stitcher / mainfix for fixing to light section steel

Supplied pre-assembled with an Aluminium / EPDM rubber 15mm diameter sealing washer, normally used in wall applications.

Certified by

Certified by

DrillFast® carbon steel low profile dual purpose fastener 15mm washer

Carbon steel dual purpose stitcher / mainfix for fixing to light section steel

Supplied pre-assembled with an Aluminium / EPDM rubber 15mm diameter sealing washer, normally used in wall applications.

Product Code

Your price

Per 100

Qty

Create New Favourites List

	Years / Environment
	Interior	Rural	Urban	Industrial / Coastal	Marine	Swimming pools & Chemical plants
Corrosivity Category	C1	C2	C3	C4	C5	-
Carbon steel case hardened	25	12	0	0	0	0

Installation tool	Variable speed electric screw gun
Installation drive	Fixfast RedDrive
Installation speed	1500 RPM
Correct installation	Fasteners should be driven within three degrees of perpendicular to the surface of the fastened material. Use a depth-setting nosepiece to avoid over-driving, and do not over-tighten. Variants with bonded washers should not have the rubber compressed to less than two-thirds of its uncompressed height. Care should be taken when engaging and disengaging from the fastener head to avoid damage to the protective coating.
Handling	Fasteners may have sharp edges, and the use of power tools can be dangerous. Use personal protective equipment. Store fasteners in dry conditions. Inspect each fastener before use and do not use damaged fasteners.