A2/304 grade stainless steel fastener for fixing to heavy section steel.
Supplied pre-assembled with an Aluminium / EPDM rubber 15mm diameter sealing washer, normally used in wall applications.
Estimated lead times
1 Day
Estimated lead times
1 Day
Estimated lead times
1 Day
Estimated lead times
1 Day
Stainless steel fastener for fixing single skin sheeting and brackets to heavy steel.
Can be also used in general purpose applications e.g. fixing aluminium.
Features
- Genuine A2 / 304 grade stainless steel
- Excellent drilling and tapping performance
- Consistently high pull-out and shear values
- Specialist green drive installation tool
- Supplied pre-assembled with an Aluminium / EPDM rubber 15mm diameter sealing washer, normally used in wall applications
- For mechanically fixing steel sheeting systems to heavy steel purlins and sections
Years / Environment
|
|||||||
---|---|---|---|---|---|---|---|
Interior | Semi-interior | Rural | Urban | Industrial / Coastal | Marine | Swimming pools & Chemical plants | |
Corrosivity Category | C1 | - | C2 | C3 | C4 | C5 | - |
Austenitic Stainless Steel A2 Grade (304) | 30 | 25 | 25 | 25 | 15 | 0 | 0 |
Years / Environment
|
|||||||
---|---|---|---|---|---|---|---|
Interior | Semi-interior | Rural | Urban | Industrial / Coastal | Marine | Swimming pools & Chemical plants | |
Corrosivity Category | C1 | - | C2 | C3 | C4 | C5 | - |
Austenitic Stainless Steel A2 Grade (304) | 30 | 25 | 25 | 25 | 15 | 0 | 0 |
Years / Environment
|
|||||||
---|---|---|---|---|---|---|---|
Interior | Semi-interior | Rural | Urban | Industrial / Coastal | Marine | Swimming pools & Chemical plants | |
Corrosivity Category | C1 | - | C2 | C3 | C4 | C5 | - |
Austenitic Stainless Steel A2 Grade (304) | 30 | 25 | 25 | 25 | 15 | 0 | 0 |
Substrate
Steel
|
4 mm |
Steel | |
0.5 mm | 2.11 kN |
NR,II,K (Tensile - Pull-out) | 4mm Steel: 2.80 kN |
6mm Steel: 3.09 kN | |
8mm Steel: 6.89 kN |
Substrate
Steel
|
A15 Washer |
Steel | 4 mm |
0.5 mm | 3.38 kN |
Substrate
Steel
|
4 mm |
Steel | |
0.5 mm | 2.11 kN |
NR,II,K (Tensile - Pull-out) | 4mm Steel: 2.80 kN |
6mm Steel: 3.09 kN | |
8mm Steel: 6.89 kN |
Substrate
Steel
|
A15 Washer |
Steel | 4 mm |
0.5 mm | 3.38 kN |
Substrate
Steel
|
4 mm |
Steel | |
0.5 mm | 2.11 kN |
NR,II,K (Tensile - Pull-out) | 4mm Steel: 2.80 kN |
6mm Steel: 3.09 kN | |
8mm Steel: 6.89 kN |
Substrate
Steel
|
A15 Washer |
Steel | 4 mm |
0.5 mm | 3.38 kN |
Installation tool | Variable speed electric screwdriver |
Installation drive | Fixfast GreenDrive (8mm hex integral socket with retaining clip) |
Installation speed | 1500 RPM |
Correct installation | Fasteners should be driven within three degrees of perpendicular to the surface of the fastened material. Use a depth-setting nosepiece to avoid over-driving, and do not over-tighten. Variants with bonded washers should not have the rubber compressed to less than two-thirds of its uncompressed height. Care should be taken when engaging and disengaging from the fastener head to avoid damage to the protective coating. |
Handling | Fasteners may have sharp edges, and the use of power tools can be dangerous. Use personal protective equipment. Store fasteners in dry conditions. Inspect each fastener before use and do not use damaged fasteners. |
Stainless steel fastener for fixing single skin sheeting and brackets to heavy steel.
Can be also used in general purpose applications e.g. fixing aluminium.
Features
- Genuine A2 / 304 grade stainless steel
- Excellent drilling and tapping performance
- Consistently high pull-out and shear values
- Specialist green drive installation tool
- Supplied pre-assembled with an Aluminium / EPDM rubber 15mm diameter sealing washer, normally used in wall applications
- For mechanically fixing steel sheeting systems to heavy steel purlins and sections
Years / Environment
|
|||||||
---|---|---|---|---|---|---|---|
Interior | Semi-interior | Rural | Urban | Industrial / Coastal | Marine | Swimming pools & Chemical plants | |
Corrosivity Category | C1 | - | C2 | C3 | C4 | C5 | - |
Austenitic Stainless Steel A2 Grade (304) | 30 | 25 | 25 | 25 | 15 | 0 | 0 |
Years / Environment
|
|||||||
---|---|---|---|---|---|---|---|
Interior | Semi-interior | Rural | Urban | Industrial / Coastal | Marine | Swimming pools & Chemical plants | |
Corrosivity Category | C1 | - | C2 | C3 | C4 | C5 | - |
Austenitic Stainless Steel A2 Grade (304) | 30 | 25 | 25 | 25 | 15 | 0 | 0 |
Years / Environment
|
|||||||
---|---|---|---|---|---|---|---|
Interior | Semi-interior | Rural | Urban | Industrial / Coastal | Marine | Swimming pools & Chemical plants | |
Corrosivity Category | C1 | - | C2 | C3 | C4 | C5 | - |
Austenitic Stainless Steel A2 Grade (304) | 30 | 25 | 25 | 25 | 15 | 0 | 0 |
Substrate
Steel
|
4 mm |
Steel | |
0.5 mm | 2.11 kN |
NR,II,K (Tensile - Pull-out) | 4mm Steel: 2.80 kN |
6mm Steel: 3.09 kN | |
8mm Steel: 6.89 kN |
Substrate
Steel
|
A15 Washer |
Steel | 4 mm |
0.5 mm | 3.38 kN |
Substrate
Steel
|
4 mm |
Steel | |
0.5 mm | 2.11 kN |
NR,II,K (Tensile - Pull-out) | 4mm Steel: 2.80 kN |
6mm Steel: 3.09 kN | |
8mm Steel: 6.89 kN |
Substrate
Steel
|
A15 Washer |
Steel | 4 mm |
0.5 mm | 3.38 kN |
Substrate
Steel
|
4 mm |
Steel | |
0.5 mm | 2.11 kN |
NR,II,K (Tensile - Pull-out) | 4mm Steel: 2.80 kN |
6mm Steel: 3.09 kN | |
8mm Steel: 6.89 kN |
Substrate
Steel
|
A15 Washer |
Steel | 4 mm |
0.5 mm | 3.38 kN |
Installation tool | Variable speed electric screwdriver |
Installation drive | Fixfast GreenDrive (8mm hex integral socket with retaining clip) |
Installation speed | 1500 RPM |
Correct installation | Fasteners should be driven within three degrees of perpendicular to the surface of the fastened material. Use a depth-setting nosepiece to avoid over-driving, and do not over-tighten. Variants with bonded washers should not have the rubber compressed to less than two-thirds of its uncompressed height. Care should be taken when engaging and disengaging from the fastener head to avoid damage to the protective coating. |
Handling | Fasteners may have sharp edges, and the use of power tools can be dangerous. Use personal protective equipment. Store fasteners in dry conditions. Inspect each fastener before use and do not use damaged fasteners. |