A4/316 grade stainless steel low profile composite panel fastener for fixing to heavy section steel.
No sealing washer, normally for internal applications or where there is no weatherseal required.
Estimated lead times
1 Day
Estimated lead times
1 Day
Estimated lead times
1 Day
Estimated lead times
1 Day
Low profile stainless steel high thread fasteners for fixing composite panel systems to heavy steel.
Features
- High thread provides optimal clamping force to top sheet
- A4/316 grade stainless steel for corrosion resistance
- Free spin zone prevents thread strip out under normal installation conditions
- Specialist RedDrive installation tool
- No sealing washer - when a weatherseal is not required, often in secret fix or internal applications
- For mechanically fixing composite panel systems to heavy steel purlins and sections
Years / Environment
|
|||||||
---|---|---|---|---|---|---|---|
Interior | Semi-interior | Rural | Urban | Industrial / Coastal | Marine | Swimming pools & Chemical plants | |
Corrosivity Category | C1 | - | C2 | C3 | C4 | C5 | - |
Austenitic Stainless Steel A4 Grade (316) | 40 | 40 | 40 | 40 | 30 | 25 | 0 |
Years / Environment
|
|||||||
---|---|---|---|---|---|---|---|
Interior | Semi-interior | Rural | Urban | Industrial / Coastal | Marine | Swimming pools & Chemical plants | |
Corrosivity Category | C1 | - | C2 | C3 | C4 | C5 | - |
Austenitic Stainless Steel A4 Grade (316) | 40 | 40 | 40 | 40 | 30 | 25 | 0 |
Years / Environment
|
|||||||
---|---|---|---|---|---|---|---|
Interior | Semi-interior | Rural | Urban | Industrial / Coastal | Marine | Swimming pools & Chemical plants | |
Corrosivity Category | C1 | - | C2 | C3 | C4 | C5 | - |
Austenitic Stainless Steel A4 Grade (316) | 40 | 40 | 40 | 40 | 30 | 25 | 0 |
Substrate
Composite panel
|
4 mm |
Steel | |
0.5 mm | 0.98 kN |
NR,II,K (Tensile - Pull-out) | 4mm Steel: 4.02 kN |
6mm Steel: 5.44 kN | |
8mm Steel: 5.59 kN |
Substrate
Composite panel
|
4 mm |
Steel | |
0.5 mm | 0.98 kN |
NR,II,K (Tensile - Pull-out) | 4mm Steel: 4.02 kN |
6mm Steel: 5.44 kN | |
8mm Steel: 5.59 kN |
Substrate
Composite panel
|
4 mm |
Steel | |
0.5 mm | 0.98 kN |
NR,II,K (Tensile - Pull-out) | 4mm Steel: 4.02 kN |
6mm Steel: 5.44 kN | |
8mm Steel: 5.59 kN |
Installation tool | Variable speed electric screwdriver |
Installation drive | Fixfast RedDrive |
Installation speed | 1500 RPM |
Correct installation | Fasteners should be driven within three degrees of perpendicular to the surface of the fastened material. Use a depth-setting nosepiece to avoid over-driving, and do not over-tighten. Variants with bonded washers should not have the rubber compressed to less than two-thirds of its uncompressed height. Care should be taken when engaging and disengaging from the fastener head to avoid damage to the protective coating. |
Handling | Fasteners may have sharp edges, and the use of power tools can be dangerous. Use personal protective equipment. Store fasteners in dry conditions. Inspect each fastener before use and do not use damaged fasteners. |
Low profile stainless steel high thread fasteners for fixing composite panel systems to heavy steel.
Features
- High thread provides optimal clamping force to top sheet
- A4/316 grade stainless steel for corrosion resistance
- Free spin zone prevents thread strip out under normal installation conditions
- Specialist RedDrive installation tool
- No sealing washer - when a weatherseal is not required, often in secret fix or internal applications
- For mechanically fixing composite panel systems to heavy steel purlins and sections
Years / Environment
|
|||||||
---|---|---|---|---|---|---|---|
Interior | Semi-interior | Rural | Urban | Industrial / Coastal | Marine | Swimming pools & Chemical plants | |
Corrosivity Category | C1 | - | C2 | C3 | C4 | C5 | - |
Austenitic Stainless Steel A4 Grade (316) | 40 | 40 | 40 | 40 | 30 | 25 | 0 |
Years / Environment
|
|||||||
---|---|---|---|---|---|---|---|
Interior | Semi-interior | Rural | Urban | Industrial / Coastal | Marine | Swimming pools & Chemical plants | |
Corrosivity Category | C1 | - | C2 | C3 | C4 | C5 | - |
Austenitic Stainless Steel A4 Grade (316) | 40 | 40 | 40 | 40 | 30 | 25 | 0 |
Years / Environment
|
|||||||
---|---|---|---|---|---|---|---|
Interior | Semi-interior | Rural | Urban | Industrial / Coastal | Marine | Swimming pools & Chemical plants | |
Corrosivity Category | C1 | - | C2 | C3 | C4 | C5 | - |
Austenitic Stainless Steel A4 Grade (316) | 40 | 40 | 40 | 40 | 30 | 25 | 0 |
Substrate
Composite panel
|
4 mm |
Steel | |
0.5 mm | 0.98 kN |
NR,II,K (Tensile - Pull-out) | 4mm Steel: 4.02 kN |
6mm Steel: 5.44 kN | |
8mm Steel: 5.59 kN |
Substrate
Composite panel
|
4 mm |
Steel | |
0.5 mm | 0.98 kN |
NR,II,K (Tensile - Pull-out) | 4mm Steel: 4.02 kN |
6mm Steel: 5.44 kN | |
8mm Steel: 5.59 kN |
Substrate
Composite panel
|
4 mm |
Steel | |
0.5 mm | 0.98 kN |
NR,II,K (Tensile - Pull-out) | 4mm Steel: 4.02 kN |
6mm Steel: 5.44 kN | |
8mm Steel: 5.59 kN |
Installation tool | Variable speed electric screwdriver |
Installation drive | Fixfast RedDrive |
Installation speed | 1500 RPM |
Correct installation | Fasteners should be driven within three degrees of perpendicular to the surface of the fastened material. Use a depth-setting nosepiece to avoid over-driving, and do not over-tighten. Variants with bonded washers should not have the rubber compressed to less than two-thirds of its uncompressed height. Care should be taken when engaging and disengaging from the fastener head to avoid damage to the protective coating. |
Handling | Fasteners may have sharp edges, and the use of power tools can be dangerous. Use personal protective equipment. Store fasteners in dry conditions. Inspect each fastener before use and do not use damaged fasteners. |