DrillFast® carbon steel Topdek fastener for timber

Carbon steel fastener for fixing the Topdek panel to timber

Certified by

Certified by

DrillFast® carbon steel Topdek fastener for timber

Carbon steel fastener for fixing the Topdek panel to timber

Product Code

Your price

Per 100

Qty

Create New Favourites List

Related Products

Add to favourites

Create New Favourites List

Product code

Your price

Per 1

	Years / Environment
	Interior	Semi-interior	Rural	Urban	Industrial / Coastal	Marine	Swimming pools & Chemical plants
Corrosivity Category	C1	-	C2	C3	C4	C5	-
Carbon steel case hardened	25	20	12	0	0	0	0

Installation tool	Variable speed electric screwdriver
Installation drive	Fixfast TD drive bar
Installation speed	1500 RPM
Correct installation	Fasteners should be driven within three degrees of perpendicular to the surface of the fastened material. Use a depth-setting nosepiece to avoid over-driving, and do not over-tighten. Variants with bonded washers should not have the rubber compressed to less than two-thirds of its uncompressed height. Care should be taken when engaging and disengaging from the fastener head to avoid damage to the protective coating.
Handling	Fasteners may have sharp edges, and the use of power tools can be dangerous. Use personal protective equipment. Store fasteners in dry conditions. Inspect each fastener before use and do not use damaged fasteners.

	Years / Environment
	Interior	Semi-interior	Rural	Urban	Industrial / Coastal	Marine	Swimming pools & Chemical plants
Corrosivity Category	C1	-	C2	C3	C4	C5	-
Carbon steel case hardened	25	20	12	0	0	0	0

Installation tool	Variable speed electric screwdriver
Installation drive	Fixfast TD drive bar
Installation speed	1500 RPM
Correct installation	Fasteners should be driven within three degrees of perpendicular to the surface of the fastened material. Use a depth-setting nosepiece to avoid over-driving, and do not over-tighten. Variants with bonded washers should not have the rubber compressed to less than two-thirds of its uncompressed height. Care should be taken when engaging and disengaging from the fastener head to avoid damage to the protective coating.
Handling	Fasteners may have sharp edges, and the use of power tools can be dangerous. Use personal protective equipment. Store fasteners in dry conditions. Inspect each fastener before use and do not use damaged fasteners.