DrillFast® 20mm A4 stainless stitching fastener, 12mm washer
A4/316 grade stainless steel low profile stitching fastener, supplied pre-assembled with a stainless steel / EPDM rubber 12mm diameter sealing washer
Max stitching capacity: 2 x 1mm sheet steel.
Estimated lead times
1 Day
Estimated lead times
1 Day
Product Code
DF2-SSA4-P-S12-4.8 x 20
Lead Time
1 Day
Your price
Qty
£0.35
(ex.VAT)
(ex.VAT)
Create New Favourites List
Key Features
Specification
Capacity
Performance
Installation
Downloads
Description
Stainless steel sheet stitching fasteners
Features & Benefits
- A4/316 grade stainless steel
- Free spin zone prevents thread strip out
- For use when a discreet finish is needed, supplied pre-assembled with a stainless / EPDM rubber 12mm sealing washer, normally used in wall applications.
Application
- For mechanically fixing (stitching) two metal sheets up to 1mm thick together
Fastener Material
Fastener
Austenitic Stainless Steel A4 Grade (316) with organic coating
Sealing Washer
S12 washer
Durability Class
|
Years / Environment
|
||||||
|---|---|---|---|---|---|---|
| Interior | Rural | Urban | Industrial / Coastal | Marine | Swimming pools & Chemical plants | |
| Corrosivity Category | C1 | C2 | C3 | C4 | C5 | - |
| Austenitic Stainless Steel A4 Grade (316) | 40 | 40 | 40 | 25 | 25 | 0 |
Dimensions
Diameter
4.8 mm
Length (mm)
20 mm
Effective Thread Length (Min)
0.8 mm
Effective Thread Length (Max)
2 mm
Head Style
Low profile pan, TX25 recess
Drilling Capacity
2x Steel
0 mm
1 mm
Build-up
Effective thread length
Fastener Shear Performance VR,K
|
Substrate
Steel
|
0.5 mm |
| Steel | |
| 0.5 mm | 1.02 kN |
Fastener pull-out performance
| NR,II,K (Tensile - Pull-out) | 0.5mm Steel: 0.56 kN |
Fastener Pullover Performance NR,K
|
Substrate
Steel
|
S15 washer |
| Steel | 0.5 mm |
| 0.5 mm | 3.6 kN |
Installation and handling
| Installation tool | Variable speed electric screw gun |
| Installation drive | Fixfast RedDrive |
| Installation speed | 1500 RPM |
| Correct installation | Fasteners should be driven within three degrees of perpendicular to the surface of the fastened material. Use a depth-setting nosepiece to avoid over-driving, and do not over-tighten. Variants with bonded washers should not have the rubber compressed to less than two-thirds of its uncompressed height. Care should be taken when engaging and disengaging from the fastener head to avoid damage to the protective coating. |
| Handling | Fasteners may have sharp edges, and the use of power tools can be dangerous. Use personal protective equipment. Store fasteners in dry conditions. Inspect each fastener before use and do not use damaged fasteners. |
Key Features
Description
Stainless steel sheet stitching fasteners
Features & Benefits
- A4/316 grade stainless steel
- Free spin zone prevents thread strip out
- For use when a discreet finish is needed, supplied pre-assembled with a stainless / EPDM rubber 12mm sealing washer, normally used in wall applications.
Application
- For mechanically fixing (stitching) two metal sheets up to 1mm thick together
Specification
Fastener Material
Fastener
Austenitic Stainless Steel A4 Grade (316) with organic coating
Sealing Washer
S12 washer
Durability Class
|
Years / Environment
|
||||||
|---|---|---|---|---|---|---|
| Interior | Rural | Urban | Industrial / Coastal | Marine | Swimming pools & Chemical plants | |
| Corrosivity Category | C1 | C2 | C3 | C4 | C5 | - |
| Austenitic Stainless Steel A4 Grade (316) | 40 | 40 | 40 | 25 | 25 | 0 |
Dimensions
Diameter
4.8 mm
Length (mm)
20 mm
Effective Thread Length (Min)
0.8 mm
Effective Thread Length (Max)
2 mm
Head Style
Low profile pan, TX25 recess
Drilling Capacity
2x Steel
0 mm
1 mm
Capacity
Build-up
Effective thread length
Performance
Fastener Shear Performance VR,K
|
Substrate
Steel
|
0.5 mm |
| Steel | |
| 0.5 mm | 1.02 kN |
Fastener pull-out performance
| NR,II,K (Tensile - Pull-out) | 0.5mm Steel: 0.56 kN |
Fastener Pullover Performance NR,K
|
Substrate
Steel
|
S15 washer |
| Steel | 0.5 mm |
| 0.5 mm | 3.6 kN |
Installation
Installation and handling
| Installation tool | Variable speed electric screw gun |
| Installation drive | Fixfast RedDrive |
| Installation speed | 1500 RPM |
| Correct installation | Fasteners should be driven within three degrees of perpendicular to the surface of the fastened material. Use a depth-setting nosepiece to avoid over-driving, and do not over-tighten. Variants with bonded washers should not have the rubber compressed to less than two-thirds of its uncompressed height. Care should be taken when engaging and disengaging from the fastener head to avoid damage to the protective coating. |
| Handling | Fasteners may have sharp edges, and the use of power tools can be dangerous. Use personal protective equipment. Store fasteners in dry conditions. Inspect each fastener before use and do not use damaged fasteners. |
Downloads
Related Products
