DrillFast® carbon steel 5.5mm diameter clip fix fastener
Carbon steel clip fix fastener for fixing to light section steel
Estimated lead times
1 Day
Estimated lead times
1 Day
Product Code
DF5-CF-5.5 x 22
Lead Time
1 Day
Your price
Qty
£0.08
(ex.VAT)
(ex.VAT)
Create New Favourites List
Key Features
Specification
Capacity
Performance
Installation
Downloads
Description
Carbon steel secret fix fasteners for fixing clips, brackets and flashing details
Features & Benefits
- Low profile 'cf' head for a discreet finish
- Purpose designed and manufactured by Fixfast
- Specially designed thread form for easy drilling into steel
Application
- For mechanically fixing metal sheeting systems to light metal purlins and rails
- For mechanically fixing components of steel and metal framing systems
Fastener Material
Fastener
Carbon steel case hardened with ml_organic coating
Sealing Washer
No washer
Durability Class
|
Years / Environment
|
|||||||
|---|---|---|---|---|---|---|---|
| Interior | Semi-interior | Rural | Urban | Industrial / Coastal | Marine | Swimming pools & Chemical plants | |
| Corrosivity Category | C1 | - | C2 | C3 | C4 | C5 | - |
| Carbon steel case hardened | 25 | 20 | 12 | 0 | 0 | 0 | 0 |
Dimensions
Diameter
5.5 mm
Length (mm)
22 mm
Effective Thread Length (Min)
0 mm
Effective Thread Length (Max)
11 mm
Head Style
Wafer head, 2PZD
Drilling Capacity
Steel
1.2 mm
5 mm
Effective thread length
Fastener Shear Performance VR,K
|
Substrate
Steel
|
1.2 mm |
| Steel | |
| 0.5 mm | 1.91 kN |
Fastener pull-out performance
| NR,II,K (Tensile - Pull-out) | 1.2mm Steel: 1.52 kN |
| 3mm Steel: 5.42 kN | |
| 5mm Steel: 10.76 kN |
Fastener Pullover Performance NR,K
|
Substrate
Steel
|
No washer |
| Steel | 5 mm |
| 0.5 mm | 3.98 kN |
| 0.7 mm | 4.52 kN |
Installation and handling
| Installation tool | Variable speed electric screw gun |
| Installation drive | 2-PZD |
| Installation speed | 1500 RPM |
| Correct installation | Fasteners should be driven within three degrees of perpendicular to the surface of the fastened material. Use a depth-setting nosepiece to avoid over-driving, and do not over-tighten. Variants with bonded washers should not have the rubber compressed to less than two-thirds of its uncompressed height. Care should be taken when engaging and disengaging from the fastener head to avoid damage to the protective coating. |
| Handling | Fasteners may have sharp edges, and the use of power tools can be dangerous. Use personal protective equipment. Store fasteners in dry conditions. Inspect each fastener before use and do not use damaged fasteners. |
Key Features
Description
Carbon steel secret fix fasteners for fixing clips, brackets and flashing details
Features & Benefits
- Low profile 'cf' head for a discreet finish
- Purpose designed and manufactured by Fixfast
- Specially designed thread form for easy drilling into steel
Application
- For mechanically fixing metal sheeting systems to light metal purlins and rails
- For mechanically fixing components of steel and metal framing systems
Specification
Fastener Material
Fastener
Carbon steel case hardened with ml_organic coating
Sealing Washer
No washer
Durability Class
|
Years / Environment
|
|||||||
|---|---|---|---|---|---|---|---|
| Interior | Semi-interior | Rural | Urban | Industrial / Coastal | Marine | Swimming pools & Chemical plants | |
| Corrosivity Category | C1 | - | C2 | C3 | C4 | C5 | - |
| Carbon steel case hardened | 25 | 20 | 12 | 0 | 0 | 0 | 0 |
Dimensions
Diameter
5.5 mm
Length (mm)
22 mm
Effective Thread Length (Min)
0 mm
Effective Thread Length (Max)
11 mm
Head Style
Wafer head, 2PZD
Drilling Capacity
Steel
1.2 mm
5 mm
Capacity
Effective thread length
Performance
Fastener Shear Performance VR,K
|
Substrate
Steel
|
1.2 mm |
| Steel | |
| 0.5 mm | 1.91 kN |
Fastener pull-out performance
| NR,II,K (Tensile - Pull-out) | 1.2mm Steel: 1.52 kN |
| 3mm Steel: 5.42 kN | |
| 5mm Steel: 10.76 kN |
Fastener Pullover Performance NR,K
|
Substrate
Steel
|
No washer |
| Steel | 5 mm |
| 0.5 mm | 3.98 kN |
| 0.7 mm | 4.52 kN |
Installation
Installation and handling
| Installation tool | Variable speed electric screw gun |
| Installation drive | 2-PZD |
| Installation speed | 1500 RPM |
| Correct installation | Fasteners should be driven within three degrees of perpendicular to the surface of the fastened material. Use a depth-setting nosepiece to avoid over-driving, and do not over-tighten. Variants with bonded washers should not have the rubber compressed to less than two-thirds of its uncompressed height. Care should be taken when engaging and disengaging from the fastener head to avoid damage to the protective coating. |
| Handling | Fasteners may have sharp edges, and the use of power tools can be dangerous. Use personal protective equipment. Store fasteners in dry conditions. Inspect each fastener before use and do not use damaged fasteners. |
Downloads
