DrillFast® carbon steel Topdek fastener for medium section
Carbon steel fastener for fixing Topdek panel to light/medium section steel
Certified by
Estimated lead times
1 Day
calcPageSize())"
/>
Certified by
Estimated lead times
1 Day
Product Code
DF6-TD-6.3 x 30
Lead Time
1 Day
Your price
Per 100
Qty
0 ? qty - step : step; $dispatch('update-qty-561', qty)">
£0.15
(ex.VAT)
(ex.VAT)
Create New Favourites List
Key Features
Specification
Installation
Downloads
Description
Specially designed carbon steel fastener for fixing membrane faced panels to light steel up to 6mm
Features
- Unique head design for easy 'one step fix' installation. The foam remains in place after penetration so there is no need to fill the hole
- Large rigid head in a one piece fastener for maximum bearing force
- Precise cutting notches to cut the membrane without damaging thin steel purlins
- Rotationally symmetrical for balanced loading and directional stability 6.3mm diameter for strength and greater loadings
Application
- For fastening membrane faced composite panels to steel 1.6-6mm thick, including purlin sleeves
Fastener Material
Fastener
Carbon steel case hardened with ml_organic coating
Sealing Washer
No washer
Durability Class
Years / Environment
|
|||||||
---|---|---|---|---|---|---|---|
Interior | Semi-interior | Rural | Urban | Industrial / Coastal | Marine | Swimming pools & Chemical plants | |
Corrosivity Category | C1 | - | C2 | C3 | C4 | C5 | - |
Carbon steel case hardened | 25 | 20 | 12 | 0 | 0 | 0 | 0 |
Dimensions
Diameter
6.3 mm
Length (mm)
30 mm
Effective Thread Length (Max)
6 mm
Head Style
TD 3PZD
Fastener material
Carbon steel case hardened
Drilling Capacity
Steel
1.6 mm
6 mm
Installation and handling
Installation tool | Variable speed electric screwdriver |
Installation drive | Fixfast TD drive bar |
Installation speed | 1500 RPM |
Correct installation | Fasteners should be driven within three degrees of perpendicular to the surface of the fastened material. Use a depth-setting nosepiece to avoid over-driving, and do not over-tighten. Variants with bonded washers should not have the rubber compressed to less than two-thirds of its uncompressed height. Care should be taken when engaging and disengaging from the fastener head to avoid damage to the protective coating. |
Handling | Fasteners may have sharp edges, and the use of power tools can be dangerous. Use personal protective equipment. Store fasteners in dry conditions. Inspect each fastener before use and do not use damaged fasteners. |
Key Features
Description
Specially designed carbon steel fastener for fixing membrane faced panels to light steel up to 6mm
Features
- Unique head design for easy 'one step fix' installation. The foam remains in place after penetration so there is no need to fill the hole
- Large rigid head in a one piece fastener for maximum bearing force
- Precise cutting notches to cut the membrane without damaging thin steel purlins
- Rotationally symmetrical for balanced loading and directional stability 6.3mm diameter for strength and greater loadings
Application
- For fastening membrane faced composite panels to steel 1.6-6mm thick, including purlin sleeves
Specification
Fastener Material
Fastener
Carbon steel case hardened with ml_organic coating
Sealing Washer
No washer
Durability Class
Years / Environment
|
|||||||
---|---|---|---|---|---|---|---|
Interior | Semi-interior | Rural | Urban | Industrial / Coastal | Marine | Swimming pools & Chemical plants | |
Corrosivity Category | C1 | - | C2 | C3 | C4 | C5 | - |
Carbon steel case hardened | 25 | 20 | 12 | 0 | 0 | 0 | 0 |
Dimensions
Diameter
6.3 mm
Length (mm)
30 mm
Effective Thread Length (Max)
6 mm
Head Style
TD 3PZD
Fastener material
Carbon steel case hardened
Drilling Capacity
Steel
1.6 mm
6 mm
Installation
Installation and handling
Installation tool | Variable speed electric screwdriver |
Installation drive | Fixfast TD drive bar |
Installation speed | 1500 RPM |
Correct installation | Fasteners should be driven within three degrees of perpendicular to the surface of the fastened material. Use a depth-setting nosepiece to avoid over-driving, and do not over-tighten. Variants with bonded washers should not have the rubber compressed to less than two-thirds of its uncompressed height. Care should be taken when engaging and disengaging from the fastener head to avoid damage to the protective coating. |
Handling | Fasteners may have sharp edges, and the use of power tools can be dangerous. Use personal protective equipment. Store fasteners in dry conditions. Inspect each fastener before use and do not use damaged fasteners. |
Downloads
Related Products