Stainless steel self-drilling screws for fixing sheeting and cladding - both cold and hot rolled steel up to 25mm thick, in a range of colours and head styles, including hex, low profile, and lacquered.
Stainless steel self-drilling screws for fixing to timber, and available with washers for weather sealing.
Insulated sandwich panel high thread fasteners in stainless steel for fixing to steel 1.2-25mm thick.
Stainless steel stitching fixings for end and side laps on sheeting and cladding projects.
Countersunk self-drilling wing screws for fastening timber battens to light or heavy steel, in A4/316 grade stainless steel.
A2/304 grade stainless steel self-drilling fixings for sinusoidal fibre cement sheeting – suitable for light steel.
A4/316 and A2/304 grade stainless steel self-drilling fixings for halter brackets in standing seam applications.
High corrosion resistant self-tapping screws, manufactured from 1.4529 stainless steel, for extremely high-risk and corrosive environments such as swimming pools – designed to fix sheeting and cladding to timber, light and heavy steel.
A4/316 grade stainless steel stitchers for internal firewall panel systems.
Carbon steel drillscrews for fixing sheeting and cladding to steel – available with colour moulded or hex heads.
Mainfix drillscrews for fastening to timber – carbon steel for non-corrosive or low risk environments.
Carbon steel high thread composite fasteners for fixing insulated sandwich panels to steel 1.2-12mm thick.
High thread carbon steel fasteners for fixing insulated composite panels to timber.
Stitcher drillscrews in carbon steel for standard roof and wall end or side lap fixing.
Carbon steel countersunk wingdrillers for timber battens to light or heavy steel.
Carbon steel fixings for sinusoidal fibre cement sheeting to steel and timber.
Carbon steel fixings for fastening to thin steel – with low profile wafer heads.
Carbon steel stitchers for internal firewall panel systems, with white lacquered heads to suit the internal panel colour.
Multi range pop rivets in A4/316 grade stainless steel, aluminium, and carbon steel – available to lacquer or with a countersunk head for a flush finish.
Large flange rivets in stainless steel and aluminium – suitable for expansion and contraction within the construction.
Stainless steel closed end rivets for fixing and stitching applications – also available with a small rubber sealing washer under the flange.
Three-pronged slotted body rivets with an increased clamping force than standard rivets, covering a wide grip range, and good for use in thin sheeting applications.
Fixed or sliding cleats for traditional hard metal and fully supported metal roofing systems – A2/304 stainless steel for corrosion resistance.
A2/304 stainless steel countersunk woodscrews and nails for fastening cleats back to timber in a traditional hard metal roof system.
Gun-applied silicone cartridge sealants for sheeting and cladding applications – from standard low modulus silicone, to lead safe and intumescent mastics for specialist applications.
A-grade butyl strip sealants, expanding foam tapes, air sealing tapes, and standard barrier PVC tapes for weather sealing in external or internal applications.
Hand or gun applied expanding foam for bonding, filling, fixing or insulating – available as fire resistant for increased protection.
EPDM and silicone pipe flashings for sealing pipe penetrations through metal roofs and walls.
Self-adhesive or perforated stick pins for supporting soft insulation in vertical applications.
16mm, 19mm or 29mm colour caps to suit 8mm hex headed fixings, alongside our tri-grip rivet push-on colour caps.
25mm long white or goosewing grey thread protectors to cap protruding fastener drillpoints.
Storm washers to suit Kingspan composite panels and rooflights when fixing through the crown, providing a weatherproof seal.
Bonded sealing washers in aluminium or A4/316 grade stainless steel for air-sealing and weatherproofing.
Breathable membranes and air vapour control layers for use within construction projects to prevent condensation.
Profiled filler blocks to suit Kingspan KS1000RW panels – in either large flute or pairs.
Learn more about our make-to-order special profiled filler blocks, to suit most profiles.
Fasteners for fixing brackets and cladding rails to thin steel, providing greater clamping force once tightened and installed.
PVC spray paint for repairs and touch ups – available in a wide range of colours.
Select the correct tube washer and fastener combination to suit insulation up to 300mm thick within flat roofing applications.
Thermally broken tube washers for mechanically attaching insulation and membrane to a range of substrates including metal, timber and concrete.
A4/316 stainless steel fasteners for fixing insulation and single ply or bituminous membranes to aluminium, steel and timber decks.
Bugle headed or countersunk carbon steel fixings for fastening insulation and single ply or bituminous membranes to steel, timber or concrete decks.
Pressure plate washers for insulation or membrane attachment.
Steel and aluminium termination bars in different profiles for securing, terminating, and as a peel stop - for adhered systems.
Aluminium peel rivets for fastening flat roofing insulation and membrane to fragile substrates, and drive rivets for fixing flashings and termination bars around the edge of a flat roof.
Stainless steel and carbon fixings for fixing to light, heavy or ultra heavy steel – and suitable for a range of decking applications.
Stainless steel vertical outlets for flat roofing – available with PVC or SBS factory bonded flanges to suit the membrane being used on the roof - for bonding to different flat roof systems.
Stainless steel horizontal ‘through-wall’ outlet drains with factory bonded PVC or SBS flanges – standard 400mm or longer 600mm spigots sizes available depending on the application.
Leafguards to suit all our outlet drains, preventing debris entering and blocking the downpipe.
Extension, angle and flexible pipes suitable for our outlet drains, alongside mechanical compression seals for a completely waterproof seal between the pipe and the drain.
Green roof edge restraint for retaining or separating roof garden materials in living roof applications.
Modular inspection chamber for easy access to drainage and irrigation points on living roofs – engineered to prevent blocked drains.
Pebble adhesive for use on flat roofs to ensure gravel stays in position.
EPDM & PVC rubber flashings for sealing around pipes in bituminous felt and PVC roof systems.
Stainless steel vent pipe covers for weatherproofing soil vent pipes in new build or refurbishment applications.
RyMar cable ducts and flashings for weatherproofing penetrations through a flat roof – preventing water ingress.
Pourable sealer for pitch pockets on flat roofs – available in kits or individual sections.
Fixed and adjustable paving support pedestals for flat roofs and terraces.
Lightning clips for fixing bare or coated lightning conductor tape to roof systems.
PVC or TPO anti-slip rooftop walkway matting for safe access to maintenance on flat roofs.
Permanent one-step repair system for a range of roof types – creating a waterproof, moisture-free and airtight barrier.
A4/316 grade stainless steel or zinc plated through bolts for fixing façade brackets to concrete, including cracked concrete.
A4/316 grade stainless steel and zinc plated steel frame fixings for fastening to masonry and concrete.
A4/316 grade stainless steel or zinc-plated threaded rod and injection mortar systems for use with concrete and masonry.
A4/316 grade stainless steel fasteners for fixing to timber or light section steel substrates within façade applications.
Aluminium, A4/316 or A2/304 grade stainless steel helping hand brackets for façade support systems – thermostop pads included as standard.
L or T shaped aluminium rails for supporting façade systems.
A4/316 and A2/304 grade stainless steel fasteners for fixing brackets to rails in façade helping hand support systems.
Hammer-in insulation fixings in a range of materials – A4/316 grade stainless steel, polypropylene, and steel for various façade applications.
A2/304 stainless steel self-drilling fasteners and accessories for fixing insulation back to light steel within a façade system.
Drillscrews for fixing façade panels to timber or light steel – low profile and available lacquered to a wide range of colours to blend in with the panels.
Stainless steel rivets for façade applications – and available as lacquered to order in a wide range of colours.
SikaTack panel façade adhesive for secret fixing panels to substrates within façade systems.
Hex headed hollo bolts for attaching brackets or support rails to box section or closed steelwork – where standard nuts and bolts can’t be used.
A4/316 grade stainless steel masonry tapcons and zinc plated self-tapping anchors for fixing to masonry and concrete.
A2/304 grade stainless steel and carbon steel countersunk woodscrews.
A range of self-drilling fasteners for a variety of applications – low profile, countersunk or hex headed.
Tamper-proof stainless steel self-tapping security fasteners.
Hammer fixings for fixing to concrete and masonry – 6mm, 8mm, or 10mm diameter.
Stainless steel or BZP coated carbon steel fully threaded hex sets for construction projects.
Nylon expansion plugs for fastening to solid concrete or brickwork.
Stainless steel or galvanised adjustable banding and clips for construction projects.
Horseshoe and glazing packing shims for spacing and various applications.
Polypropylene blue rope and waterproofing tarpaulin for temporary use.
Rainwater downpipe to temporarily control the flow of water from roofs where the guttering system isn’t complete.
Paintbrushes and roller kits for touch ups.
Stainless steel rodent mesh and fibreglass flyscreen insect mesh, to keep animals from entering gaps behind the external cladding.
Electric screwguns with batteries and accessories to suit – including depth setting sleeves for Fein, Makita and Hikoki screwguns.
Makita SDS hammer drill for drilling concrete, masonry and brick.
Cordless battery rivet guns for easy installation of rivets.
Leister heat welding guns and accessories for flat roofing.
Fein electric nibblers for cutting flat or corrugated steel or aluminium.
Composite panel saws and blades suitable for cutting aluminium, steel, and timber.
Diamond blades and cutting discs for angle grinders, as well as our reciprocating saw and jigsaw blades for cutting metal and timber.
Power transformers and extension leads to suit.
Drive bits and sockets to suit all our fastener heads – standard sizes or extendable available, depending on the circumstance.
Extension drive bit and socket holders – magnetic or non-magnetic for carbon or stainless steel fasteners.
Jobber, split point and blacksmith twist drill bits for drilling metal.
SDS plus and STOPP drill bits for drilling into concrete and masonry.
Holesaws, arbors and conecut drills for cutting a range of materials including sheet metal, timber, and stainless steel.
Seam rollers for perfecting welds between heat or solvent welded membranes.
Manual riveters for installing rivets by hand – each riveter type includes a range of standard nosepieces to allow for different rivet sizes.
High quality range of tin snips and bolt croppers for a variety of hand metal cutting.
Torque wrenches and ratchets for fixing and setting concrete and masonry fasteners within façade and rainscreen systems correctly.
Vacuum seal tester for testing sheeting and cladding fasteners for weather resistance and air leakage.
Checkout using your account
Checkout as a new customer
Creating an account has many benefits:
Estimated lead times