Carbon steel stitching moulded fasteners, supplied pre-assembled with an Aluminium / EPDM rubber 15mm diameter sealing washer, normally used in wall applications.
Standard stock colours are available for next day delivery, special colours have an extended lead time which will be confirmed on your order acknowledgement - please call us if you wish to confirm a lead time before ordering.
![](/media/akeneo_connector/reference_entities/records/F/i/FixFast_11_23_Drillfast_high_res_0c39.jpg)
![](/media/akeneo_connector/reference_entities/records/c/e/ce_mark_0_1__495f.png)
Estimated lead times
1-4 Days
![MatchFast® carbon steel 8.0mm diameter stitching fastener 15mm washer main product photo](https://www.fixfast.com/media/catalog/product/cache/3cf72d4c7a492e0403a39e264af2d130/M/F/MF2-A15-8-0-x-25_3.jpg)
![](/media/akeneo_connector/reference_entities/records/F/i/FixFast_11_23_Drillfast_high_res_0c39.jpg)
![](/media/akeneo_connector/reference_entities/records/c/e/ce_mark_0_1__495f.png)
Estimated lead times
1-4 Days
Carbon steel nylon moulded head fasteners for steel sheet stitching.
Features
- Precisely matched colour head
- Unique Enduroguard coating for excellent corrosion resistance
- Free spin zone prevents thread strip out
- Purpose designed for easy and effective installations
- Supplied pre-assembled with an Aluminium / EPDM rubber 15mm diameter sealing washer, normally used for wall applications
- For mechanically fixing (stitching) two metal sheets up to 1mm thick together
Years / Environment
|
|||||||
---|---|---|---|---|---|---|---|
Interior | Semi-interior | Rural | Urban | Industrial / Coastal | Marine | Swimming pools & Chemical plants | |
Corrosivity Category | C1 | - | C2 | C3 | C4 | C5 | - |
Carbon steel case hardened | 25 | 20 | 12 | 0 | 0 | 0 | 0 |
Substrate
Steel
|
0.5 mm |
Steel | |
0.5 mm | 1.53 kN |
NR,II,K (Tensile - Pull-out) | 0.5mm Steel: 0.91 kN |
Substrate
Steel
|
A15 Washer |
Steel | 0.5 mm |
0.5 mm | 3.38 kN |
Installation tool | Variable speed electric screwdriver |
Installation drive | Fixfast Matchfast MF1165 |
Installation speed | 1500 RPM |
Correct installation | Fasteners should be driven within three degrees of perpendicular to the surface of the fastened material. Use a depth-setting nosepiece to avoid over-driving, and do not over-tighten. Variants with bonded washers should not have the rubber compressed to less than two-thirds of its uncompressed height. Care should be taken when engaging and disengaging from the fastener head to avoid damage to the protective coating. |
Handling | Fasteners may have sharp edges, and the use of power tools can be dangerous. Use personal protective equipment. Store fasteners in dry conditions. Inspect each fastener before use and do not use damaged fasteners. |
Carbon steel nylon moulded head fasteners for steel sheet stitching.
Features
- Precisely matched colour head
- Unique Enduroguard coating for excellent corrosion resistance
- Free spin zone prevents thread strip out
- Purpose designed for easy and effective installations
- Supplied pre-assembled with an Aluminium / EPDM rubber 15mm diameter sealing washer, normally used for wall applications
- For mechanically fixing (stitching) two metal sheets up to 1mm thick together
Years / Environment
|
|||||||
---|---|---|---|---|---|---|---|
Interior | Semi-interior | Rural | Urban | Industrial / Coastal | Marine | Swimming pools & Chemical plants | |
Corrosivity Category | C1 | - | C2 | C3 | C4 | C5 | - |
Carbon steel case hardened | 25 | 20 | 12 | 0 | 0 | 0 | 0 |
Substrate
Steel
|
0.5 mm |
Steel | |
0.5 mm | 1.53 kN |
NR,II,K (Tensile - Pull-out) | 0.5mm Steel: 0.91 kN |
Substrate
Steel
|
A15 Washer |
Steel | 0.5 mm |
0.5 mm | 3.38 kN |
Installation tool | Variable speed electric screwdriver |
Installation drive | Fixfast Matchfast MF1165 |
Installation speed | 1500 RPM |
Correct installation | Fasteners should be driven within three degrees of perpendicular to the surface of the fastened material. Use a depth-setting nosepiece to avoid over-driving, and do not over-tighten. Variants with bonded washers should not have the rubber compressed to less than two-thirds of its uncompressed height. Care should be taken when engaging and disengaging from the fastener head to avoid damage to the protective coating. |
Handling | Fasteners may have sharp edges, and the use of power tools can be dangerous. Use personal protective equipment. Store fasteners in dry conditions. Inspect each fastener before use and do not use damaged fasteners. |