Fastener finder

2/304 grade stainless steel stitching moulded fasteners, supplied pre-assembled with an Aluminium / EPDM rubber 19mm diameter sealing washer, normally used in roof applications.

Standard stock colours are available for next day delivery, special colours have an extended lead time which will be confirmed on your order acknowledgement - please call us if you wish to confirm a lead time before ordering.

A4/316 grade stainless steel hex head fastener for fixing up to 300mm composite panel to heavy section steel.

Supplied pre-assembled with a 29mm diameter sealing washer, normally used for fastening rooflights. Hexagon head rooflight fasteners should always be capped with a red hex colour cap.

A4/316 grade stainless steel hex head fastener for fixing up to 300mm composite panel to steel 1.2 - 5mm.

Supplied pre-assembled with an Aluminium / EPDM rubber 29mm diameter sealing washer, normally used for fastening rooflights.

A4/316 grade stainless steel hex head fastener for fixing up to 300mm composite panel to heavy section steel.

Supplied pre-assembled with a 19mm diameter sealing washer, normally used in roof applications.

A4/316 grade stainless steel hex head fastener for fixing up to 300mm composite panel to heavy section steel.

Supplied pre-assembled with a 15mm diameter sealing washer, normally used in wall applications.

A4/316 grade stainless steel fastener for fixing up to 300mm composite panel to heavy section steel.

No sealing washer - when a weatherseal is not required.

A4/316 grade stainless steel fastener for fixing halters to timber or light section steel up to 2.0mm, supplied pre-assembled with a stainless steel 15mm sealing washer.

A4/316 grade stainless steel fastener for fixing halters to timber or light section steel up to 2.0mm.

A4/316 grade stainless steel hex head fastener for fixing up to 300mm thick composite panel to steel 1.2 - 5mm.

Supplied pre-assembled with a 19mm sealing washer, normally used in roof applications.

A4/316 grade stainless steel hex head fastener for fixing up to 300mm thick composite panel to steel 1.2 - 5mm.

Supplied pre-assembled with a 15mm sealing washer, normally used in wall / vertical applications.

A4/316 grade stainless steel hex head fastener for fixing up to 300mm thick composite panel to steel 1.2 - 5mm.

No sealing washer, usually used where there is no weatherseal required.

A2/304 grade stainless steel halter fasteners for fixing to timber or light section steel up to 2mm, no sealing washer.

A4/316 grade stainless steel fastener for fixing halters to timber or light section steel up to 2.0mm, supplied pre-assembled with a stainless steel 19mm sealing washer.

A2/304 grade stainless steel halter fasteners for fixing to timber or light section steel up to 2mm, with A19 washer

A2/304 grade stainless steel halter fasteners for fixing to timber or light section steel up to 2mm, with A15 washer

A2/304 grade stainless steel fastener for fixing to steel 1.5 - 6.0mm thick

No sealing washer - when a weatherseal is not required, often in secret fix or internal applications.

A2/304 grade stainless steel halter fastener for fixing to light section steel.

Supplied pre-assembled with an Aluminium / EPDM rubber 15mm diameter sealing washer.

A2/304 grade stainless steel halter fastener for fixing to light section steel.

Supplied pre-assembled with an Aluminium / EPDM rubber 19mm diameter sealing washer.

A2/304 grade stainless steel clip fix fasteners for fixing to light section steel

410 series stainless steel clip fix fasteners for fixing to light section steel

Carbon steel mainfix for fixing to steel 3.0 - 8.0mm thick

Supplied pre-assembled with an Aluminium / EPDM rubber 15mm diameter sealing washer, normally used in wall applications.

Carbon steel mainfix for fixing to steel 3.0 - 8.0mm thick

Supplied pre-assembled with an Aluminium / EPDM rubber 29mm diameter sealing washer, normally used for fastening rooflights. Hexagon head rooflight fasteners should always be capped with a red hex colour cap.

Carbon steel mainfix for fixing to steel 3.0 - 8.0mm thick

Supplied pre-assembled with an Aluminium / EPDM rubber 15mm diameter sealing washer, normally used in wall applications.

Carbon steel mainfix for fixing to steel 3.0 - 8.0mm thick

Supplied pre-assembled with an Aluminium / EPDM rubber 19mm diameter sealing washer, normally used in roof applications.

Carbon steel fastener for fixing to heavy section steel, up to 25mm thick

Supplied pre-assembled with an Aluminium / EPDM rubber 15mm diameter sealing washer, normally used in wall applications.

Carbon steel fastener for fixing to heavy section steel, up to 25mm thick

No sealing washer - when a weatherseal is not required, often in secret fix or internal applications.

Carbon steel fastener for fixing to heavy section steel, up to 25mm thick

Supplied pre-assembled with an Aluminium / EPDM rubber 29mm diameter sealing washer, normally used for fastening rooflights. Hexagon head rooflight fasteners should always be capped with a red hex colour cap.

Carbon steel fastener for fixing to heavy section steel, up to 25mm thick

Supplied pre-assembled with an Aluminium / EPDM rubber 19mm diameter sealing washer, normally used in roof applications.

Carbon steel moulded fastener for fixing to heavy section steel, supplied pre-assembled with an Aluminium / EPDM rubber 19mm diameter sealing washer, normally used in roof applications.

Standard stock colours are available for next day delivery, special colours have an extended lead time which will be confirmed on your order acknowledgement - please call us if you wish to confirm a lead time before ordering.

Carbon steel moulded fastener for fixing to heavy section steel, supplied pre-assembled with an Aluminium / EPDM rubber 29mm diameter sealing washer, normally used for fastening rooflights.

Standard stock colours are available for next day delivery, special colours have an extended lead time which will be confirmed on your order acknowledgement - please call us if you wish to confirm a lead time before ordering.

Carbon steel moulded fastener for fixing to heavy section steel

Supplied pre-assembled with an Aluminium / EPDM rubber 15mm diameter sealing washer, normally used in wall applications.

Carbon steel stitching fastener, supplied pre-assembled with an Aluminium / EPDM rubber 15mm diameter sealing washer, normally used in wall applications. Large 8.0mm thread diameter, often used for repair / replacement applications.

Max stitching capacity: 2 x 1mm sheet steel.

Carbon steel stitching fastener, supplied pre-assembled with an Aluminium / EPDM rubber 19mm diameter sealing washer, normally used in roof applications.

Max stitching capacity: 2 x 1mm sheet steel.

Carbon steel stitching fastener, supplied pre-assembled with an Aluminium / EPDM rubber 15mm diameter sealing washer, normally used in wall applications.

Max stitching capacity: 2 x 1mm sheet steel.

Carbon steel stitching fastener, supplied pre-assembled with an Aluminium / EPDM rubber 19mm diameter sealing washer, normally used in roof applications. Large 8.0mm thread diameter, often used for repair / replacement applications.

Max stitching capacity: 2 x 1mm sheet steel.

Carbon steel dual purpose lacquered stitcher / mainfix for fixing to light section steel, supplied pre-assembled with an Aluminium / EPDM rubber 15mm diameter sealing washer, normally used in wall applications.

Carbon steel dual purpose lacquered stitcher / mainfix for fixing to light section steel, supplied pre-assembled with an Aluminium / EPDM rubber 19mm diameter sealing washer, normally used in roof applications.